Papers / Proceedings
2024
False banana fiber reinforced geopolymer composite – A novel sustainable material
In: Ceramics International (2024)
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2024.04.177 , , , , , :
Investigation of the shape-changing property of X-ray computed tomography in the evaluation of pores
20th World Conference on Non-Destrucutve Testing (Incheon, Korea, 27th May 2024 - 31st May 2024)
In: NDT.net (ed.): Special Issue of e-Journal of Nondestructive Testing (eJNDT) ISSN 1435-4934 2024
DOI: 10.58286/29950
URL: https://www.ndt.net/article/wcndt2024/papers/A20231016-1916_E.pdf , , :
β-Modification in heterogeneous polypropylene for laser-based powder bed fusion of polymers
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00672-3
URL: https://rdcu.be/dJR4I , , :
Polypropylene in laser-based powder bed fusion of polymers
38th International Conference of the Polymer Processing Society (St. Gallen, 22nd May 2023 - 26th May 2023)
In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024
DOI: 10.1063/5.0204599 , , :
Enhanced Feedstock Processability for the Indirect Additive Manufacturing of Metals by Material Extrusion through Ethylene–Propylene Copolymer Modification
In: Polymers 16 (2024), Article No.: 2658
ISSN: 2073-4360
DOI: 10.3390/polym16182658
URL: https://www.mdpi.com/2073-4360/16/18/2658/pdf , , :
Influence of wax addition on feedstock processing behavior in additive manufacturing of metals by material extrusion
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00671-4
URL: https://rdcu.be/dID9h , , :
Continuous production of cellular ceramics through thermoplastic foam extrusion
SPE ANTEC 2024 (St. Louis, Missouri, 4th March 2024 - 7th March 2024) , :
Understanding chemical foaming of highly filled ceramic feedstocks for injection molding
38th International Conference of the Polymer Processing Society (St. Gallen, 22nd May 2023 - 26th May 2023)
In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024
DOI: 10.1063/5.0204509 , :
Adhesion‐controlled anisotropic rotational molding of multilayered ultrasoft silicone films
In: Polymer Engineering and Science (2024)
ISSN: 0032-3888
DOI: 10.1002/pen.26869 , , , :
Copper Modified Boron Nitride And Graphene Combined To Self-Assemble Three-Dimensional Thermal Conductivity Framework to Improve the Thermal Conductivity of Epoxy Resin
In: Applied Composite Materials (2024)
ISSN: 0929-189X
DOI: 10.1007/s10443-023-10195-9 , , , , , , :
Influence of phosphorous acid concentration on the self-lubricating properties of electroformed Ni-P-PTFE ternary composites
In: Surface & Coatings Technology 477 (2024), Article No.: 130375
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2024.130375 , , , :
Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
In: Applied Composite Materials (2024)
ISSN: 0929-189X
DOI: 10.1007/s10443-024-10203-6#citeas , :
Multifunctional hierarchical electronic skins: Unveiling self-repairing mechanisms and advancements in sensing and shielding performance
In: Composites Science and Technology 256 (2024), Article No.: 110769
ISSN: 0266-3538
DOI: 10.1016/j.compscitech.2024.110769 , , , , , , , , :
Investigation of the effects of energy density in Laser Sintering of polypropylene on morphological and dielectric properties for high-frequency antennas
13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15th September 2024 - 19th September 2024)
In: Michael Schmidt, C.B. Arnold, K. Wudy (ed.): Procedia CIRP 2024
DOI: 10.1016/j.procir.2024.08.112 , , :
Laser-Sintering of Cyclic Olefine Copolymer for Low Dielectric Loss Applications
In: Polymers 16 (2024), Article No.: 1751
ISSN: 2073-4360
DOI: 10.3390/polym16121751 , , :
Ti3C2Tx-UHMWPE nanocomposites - Towards an enhanced wear-resistance of biomedical implants
In: Journal of Biomedical Materials Research Part A (2024)
ISSN: 1549-3296 , , , , , , , , , , , :
Changes in Material Behavior according to the Amount of Recycled Magnetic Materials in Polymer-Bonded Magnets Based on Thermoplastics
In: Magnetism 4 (2024), p. 1-23
ISSN: 2673-8724
DOI: 10.org./10.3390/magnetism4010001 , :
Evaluation of a Recycling Strategy for Polymer-Bonded Magnets Based on Thermosets
In: Recycling 9 (2024), p. 81
ISSN: 2313-4321
DOI: 10.3390/recycling9050081 , :
The Influence of the Design and Technological Parameters of Polymer-Based Multipolar Magnets with SrFeO Hard Magnetic Filler on the Residual Magnetic Properties
In: Magnetism (2024)
ISSN: 2673-8724
DOI: 10.3390/magnetism4030011 , :
Vaterite-based in situ surface modification and process-dependent biocompatibility of laser sintered polypropylene
In: Journal of Materials Research and Technology (2024)
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2024.08.112 , , , , , , , :
Process- and topography-related cell viability on laser sintered polypropylene
8th China-Europe Symposium on Biomaterials in Regenerative Medicine (Nürnberg, 15th September 2024 - 18th September 2024) , , , , :
Geometry-induced process and part characteristics in support-free powder bed fusion of polypropylene at room temperature
In: Progress in Additive Manufacturing 9 (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00656-3 , :
Laser-Based Additive Manufacturing of Polypropylene-Agarose Composites: Processing Properties and Compressive Mechanical Properties
38th International Conference of the Polymer Processing Society (St. Gallen, 22nd May 2023 - 26th May 2023)
In: Proceedings of the 38th International Conference of the Polymer Processing Society (PPS-38), College Park, Maryland: 2024
DOI: 10.1063/5.0204523 , :
Layer-dependent temperature evolution and cooling kinetics in non-isothermal Powder Bed Fusion of polypropylene
In: Procedia CIRP 124 (2024), p. 261-264
ISSN: 2212-8271
DOI: 10.1016/j.procir.2024.08.113 , :
Low temperature powder bed fusion of polyamide 6: transient process characteristics and process-dependent part properties
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00812-9 , , :
Biomechanische Metamaterialien – Prozesse, Möglichkeiten und Perspektiven
38. Engelberger Kunststofftechnisches Seminar 2024 (Engelberg, 9th March 2024 - 14th March 2024) , , , :
Highly dynamic rotational molding of thin-walled larynx models for fluid dynamic modelling
13th International Conference on Voice Physiology and Biomechanics (Erlangen, 22nd July 2024 - 26th July 2024)
In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024 , , , , :
Multiscale polyethylene fiber - nanocellulose fiber composites through laser fusion and bacterial in situ synthesis
Conference of the Polymer Processing Society 2024 (Ferrol, 30th September 2024 - 3rd October 2024) , , , , , :
Rheological Analysis of Saliva Samples and its Influence on Voice Quality in Ectodermal Dysplasia
29th Congress of the European Society of Biomechanics (Edinburgh, 29th June 2024 - 3rd July 2024) , , , , , , , , :
Magnetic polyamide 11 powder for the powder bed fusion process by liquid-liquid phase separation and crystallization
In: Additive Manufacturing 88 (2024), Article No.: 104250
ISSN: 2214-7810
DOI: 10.1016/j.addma.2024.104250 , , , , , , , , , :
Vibratory Response of an Adaptive Synthetic Larynx Model
13th International Conference on Voice Physiology and Biomechanics (Erlangen, 22nd July 2024 - 26th July 2024)
In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024 , , , , , , :
Pulse current electroforming of Ni-PTFE nanocomposite mold insert with long-lifetime and anti-adhesive properties
In: Electrochimica Acta 491 (2024), Article No.: 144308
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2024.144308 , , , , , , :
Interlayer growth of SiC nanowires in graphene aerogel for thermal conductivity enhancement of epoxy resin and its mechanism
In: Polymer Composites 45 (2024), p. 4513-4523
DOI: 10.1002/pc.28077 , , , , , , :
2023
Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
In: Journal of Manufacturing and Materials Processing (2023)
ISSN: 2504-4494
DOI: 10.3390/jmmp7030095 , , , , , , , , , :
Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics
Solid Freeform Fabrication 2023: Proceeding of the 34th Annual International Solid Freeform Fabrication Symposium , , :
Flame-retardant Polyamide 6 for Powder Bed Fusion of Polymers
Rapid.Tech 3D (Erfurt, 9th May 2023 - 11th May 2023)
In: Michael Kynast, Michael Eichmann, Gerd Witt (ed.): Proceedings of the 19th Rapid.Tech 3D Conference 2023 , , :
Structure Development of Semi-crystalline Polymers in Laser Based Powder Bed Fusion
Antec 2023 (Denver, Colorado, 27th March 2023 - 30th March 2023) , , :
Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability
In: ACS Applied Polymer Materials (2023)
ISSN: 2637-6105
DOI: 10.1021/acsapm.2c02112 , , , , :
Mass transfer characteristics at cathode/electrolyte interface during electrodeposition of nickel microcolumns with various aspect ratios
In: Journal of Micromechanics and Microengineering 33 (2023), Article No.: 105007
ISSN: 0960-1317
DOI: 10.1088/1361-6439/acee8a , , , :
Tuning formation process of void defects in microcolumn arrays via pulse reverse electrodeposition
In: Journal of Materials Research and Technology 24 (2023), p. 3055-3066
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2023.03.201 , , , , , :
Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing
8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien, 19th April 2023 - 22nd April 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
DOI: 10.1007/978-3-031-37671-9_23 , , :
Investigating the Integration of Nonwoven Carbon Fibers for Mechanical Enhancement in Compression Molded Fiber-Reinforced Polymer Bipolar Plates
In: Polymers 15 (2023), Article No.: 3891
ISSN: 2073-4360
DOI: 10.3390/polym15193891 , , , , , :
Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging
8th International Conference on Additive Technologies iCAT (Maribor, Slowenien, 19th April 2023 - 22nd April 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
DOI: 10.1007/978-3-031-37671-9_2 , , :
Influence of the injection molding process on the tooth deflection of plastic gears during operation
5th International Conference on High Performance Plastic Gears 2023 (Garching/ Munich, 13th September 2023 - 15th September 2023) , :
Limitations of the Check Calculation for Tooth Deformation of Plastic Gears According to Gear Design Guideline VDI 2736
In: Polymers 15 (2023)
ISSN: 2073-4360
DOI: 10.3390/polym15183809 , :
Test Rig for The In Situ Measurement of The Elastic Tooth Deflection of Plastic Gears
In: Polymers 15 (2023), Article No.: 1732
ISSN: 2073-4360
DOI: 10.3390/polym15071732 , :
From trash to treasure in additive manufacturing: Recycling of polymer powders by acid catalyzed hydrolysis
In: Additive Manufacturing 71 (2023), Article No.: 103591
ISSN: 2214-7810
DOI: 10.1016/j.addma.2023.103591 , , , , , , :
Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant Incorporation
Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference , , :
Thin-Walled Part Properties in Powder Bed Fusion of Polymers—A Comparative Study on Temperature Development and Part Performance Depending on Part Thickness and Orientation
In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 96
ISSN: 2504-4494
DOI: 10.3390/jmmp7030096 , , :
Effect of ion mass transfer and electric field distribution on the formation of void defect in electroformed nickel microcolumns
In: Electrochemistry 91 (2023), Article No.: 087002
ISSN: 1344-3542
DOI: 10.5796/electrochemistry.23-00058 , , , , :
In-Situ Computed Tomography - Analysis of a Single-Lap Shear Test with Composite-Metal Pin Joints
12th International Conference on Innovation in Aviation and Space for Opening New Horizons, EASN 2022 (Barcelona, ESP, 18th October 2022 - 21st October 2022)
In: Journal of Physics: Conference Series 2023
DOI: 10.1088/1742-6596/2526/1/012067 , , , , , :
Copper and graphene work together to construct a three-dimensional skeleton thermal conductivity network to improve the thermal conductivity of the epoxy resin
In: Polymer Composites (2023)
DOI: 10.1002/pc.27494 , , , , , :
Experimental Research in Synthetic Molecular Communications - Part I
In: IEEE Nanotechnology Magazine (2023), p. 1-12
ISSN: 1942-7808
DOI: 10.1109/MNANO.2023.3262100 , , , , , , , , , , , , :
Experimental Research in Synthetic Molecular Communications - Part II
In: IEEE Nanotechnology Magazine (2023), p. 1-12
ISSN: 1942-7808
DOI: 10.1109/MNANO.2023.3262377 , , , , , , , , , , , , :
ZnO nanowire-decorated Al2O3/graphene aerogel for improving the thermal conductivity of epoxy composites
In: Polymer Composites (2023)
DOI: 10.1002/pc.27313 , , , , , , :
Electrodeposition model with dynamic ion diffusion coefficients for predicting void defects in electroformed microcolumn arrays
In: Physical Chemistry Chemical Physics (2023)
ISSN: 1463-9076
DOI: 10.1039/d2cp05396a , , , , , :
Holistic Characterization of PBF-LB/P Powder Regarding Isothermal Crystallization, Rheology and Optical Properties Under Process Conditions
In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (ed.): Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, p. 43-52
ISBN: 9783031376702
DOI: 10.1007/978-3-031-37671-9_5 , , , , :
Improving the optical properties of achromatic lenses due to the process conditions
Scholars 2nd Edition International Conference on Optics, Lasers and Photonics. 2023 (London) , :
Fiber Orientation in continuous fiber reinforced thermoplastics/metal hybrid joining via multi-pin arrays
In: Science and Engineering of Composite Materials 30 (2023)
ISSN: 0334-181X
DOI: 10.1515/secm-2022-0165
URL: https://www.degruyter.com/document/doi/10.1515/secm-2022-0165/html , , , :
Fügen thermoplastischer Faserverbunde über Pin-Strukturen mit variablen Prozessrouten
In: Werkstoffe in der Fertigung (2023)
ISSN: 0939-2629 , , :
Influence of geometrical parameters of conic pin structures in thermoplastic composite/steel hybrid joining
20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2nd April 2023 - 5th April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-15 , , , , :
Tuning residual stress in electrodeposited nickel films via pulse current
In: Surfaces and Interfaces 40 (2023), Article No.: 103038
ISSN: 2468-0230
DOI: 10.1016/j.surfin.2023.103038 , , , , , :
Correlation between the Material System and the Magnetic Properties in Thermoset-Based Multipolar Ring Magnets
In: Magnetism 3 (2023), p. 226-244
ISSN: 2673-8724
DOI: 10.3390/magnetism3030018 , :
Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
In: Magnetism 3 (2023), p. 71-89
ISSN: 2673-8724
DOI: 10.3390/magnetism3010007 , :
Rotor-integrierte Dauermagnete – Spritzguss in der Antriebstechnik
VDI Fachtagung Spritzgießen , :
Improving the integrated fabrication of insulation systems in electric drives by injection molding of thermosets due to processing conditions and slot design
In: Polymers (2023), p. 1-20
ISSN: 2073-4360
DOI: 10.3390/polym15051165 , , , :
On the robustness of the Single-Edge-Precracked-Beam (SEPB) method for fracture toughness testing of ceramic materials
In: Engineering Fracture Mechanics 291 (2023), Article No.: 109527
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2023.109527 , , , :
Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12
In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 33
ISSN: 2504-4494
DOI: 10.3390/jmmp7010033 , , :
Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies
8th International Conference on Additive Technologies (Maribor, 19th April 2023 - 22nd April 2023)
In: Additive Manufacturing in Multidisciplinary Cooperation and Production 2023
DOI: 10.1007/978-3-031-37671-9_1 , :
Eutectic In Situ Modification of Polyamide 12 Processed through Laser-Based Powder Bed Fusion
In: Materials 16 (2023), Article No.: 2050
ISSN: 1996-1944
DOI: 10.3390/ma16052050 , :
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
EMPOrIA - International Joint Conference 2023 (Aachen, 16th May 2023 - 17th May 2023)
DOI: 10.3390/jmmp7020063 , :
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 63
ISSN: 2504-4494
DOI: 10.3390/jmmp7020063 , :
RF Welding of Dielectric Lossless Foam Particles by the Application of a Dielectric Heatable Coating with High Recycling Potential
In: Polymers 15 (2023), Article No.: 3950
ISSN: 2073-4360
DOI: 10.3390/polym15193950 , , :
Interaction of tool and process design on the mechanical and tribological behaviour of an injection-moulded polyamide-steel gear set
In: Polymer Testing (2023), p. 107982
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2023.107982 , , :
Comparison of the Behavior of 3D-Printed Endothelial Cells in Different Bioinks
In: Bioengineering 10 (2023), Article No.: 751
ISSN: 2306-5354
DOI: 10.3390/bioengineering10070751 , , , , , , , , :
Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization
In: Powder Technology 424 (2023), Article No.: 118563
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2023.118563 , , , , , :
A Multi-Material Flame-Retarding System Based on Expandable Graphite for Glass-Fiber-Reinforced PA6
In: Polymers 15 (2023), Article No.: 4100
ISSN: 2073-4360
DOI: 10.3390/polym15204100 , , :
Effect of Ligament Fibers on Dynamics of Synthetic, Self-Oscillating Vocal Folds in a Biomimetic Larynx Model
In: Bioengineering 10 (2023), Article No.: 1130
ISSN: 2306-5354
DOI: 10.3390/bioengineering10101130 , , , , , :
Vibration welding of crosslinked polyethylene
In: Joining Plastics - Fügen von Kunststoffen 17 (2023), p. 166-173
ISSN: 1864-3450 , , :
Influence of particle geometry and size on the cell morphology of vacuum assisted rotationally molded foam
In: Cellular Polymers Online First (2023)
ISSN: 0262-4893
DOI: 10.1177/02624893231171662
URL: https://journals.sagepub.com/doi/10.1177/02624893231171662 , :
Structure formation in pin-like joining using vibration welding technology
In: Journal of Advanced Joining Processes (2023), p. 100158
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2023.100158 , :
Structuring step dependent characteristics in joining using pin-like structures in the vibration welding process
In: International Polymer Processing (2023)
ISSN: 0930-777X
DOI: 10.1515/ipp-2023-4419 , :
Verformung pinartiger Strukturen im Fügeprozess zur Erzeugung formschlüssiger Multimaterialverbindungen
In: Joining Plastics - Fügen von Kunststoffen 17 (2023)
ISSN: 1864-3450 , :
Functionalization of series components by joining laser-sintered with injection-molded parts: Weld seam characteristics in vibration welding
In: Composites and Advanced Materials 32 (2023)
ISSN: 2634-9833
DOI: 10.1177/26349833231165320 , , :
Investigation of parameters and porous plug enhanced enrichment with field-amplified sample stacking in microchip
In: Physics of Fluids 35 (2023)
ISSN: 1070-6631
DOI: 10.1063/5.0135314 , , , , , :
SiC Nanowires Bridged Graphene Aerogels with a Vertically Aligned Structure for Highly Thermal Conductive Epoxy Resin Composites and Their Mechanism
In: ACS Applied Electronic Materials (2023)
ISSN: 2637-6113
DOI: 10.1021/acsaelm.3c00015 , , , , , , , , :
2022
Thermisch leitfahig modifizierte Funktionskunststoffe
In: International Journal of Materials Research 94 (2022), p. 606-609
ISSN: 1862-5282
DOI: 10.1515/ijmr-2003-0105 , :
Crystallization behavior under process conditions in Powder Bed Fusion of polymers
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, 4th September 2022 - 8th September 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.108 , :
Prozessnahe simultane Bestimmung des Kristallisations- und Fließverhaltens von PA 12 im Lasersintern
Rapid.Tech 3D Druck (Erfurt, 17th May 2022 - 19th May 2022)
DOI: 10.3139/9783446475281.004 , :
Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance
SFF 2022 (Austin, Texas, 25th July 2022 - 27th July 2022) , , :
Neue Werkstoffe und Prozesse für die additive Fertigung
In: Jahresmagazin Ingenieurwissenschaften (2022)
ISSN: 1618-8357
Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2022/10/096-681_WAK-Kunststoff_2022.pdf , , , , , , , :
The influence of preheating temperature on the mechanical properties of injection-overmolded hybrid glass fiber reinforced thermoplastic composites
In: Polymer Testing 105 (2022)
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2021.107425 , , , :
Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4th September 2022 - 8th September 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.060 , :
In Situ Measured Tooth Flank Wear of Plastic Gears under Spectrum Loading
In: Polymers 14 (2022), p. 5239
ISSN: 2073-4360
DOI: 10.3390/polym14235239 , , :
In situ investigation of the influence of varying load conditions on tooth deformation and wear of polymer gears
In: Forschung Im Ingenieurwesen-Engineering Research (2022)
ISSN: 0015-7899
DOI: 10.1007/s10010-022-00591-1 , , , :
Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, 4th September 2022 - 8th September 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.109 , , :
Thin-Walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model
SFF 2022 (Austin, Texas, 25th July 2022 - 27th July 2022)
DOI: 10.26153/tsw/44659 , , , , , :
Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing
In: Polymers 14 (2022), Article No.: 759
ISSN: 2073-4360
DOI: 10.3390/polym14040759 , :
Analysis of UV-Assisted direct ink writing rheological properties and curing degree
In: Polymer Testing 105 (2022), Article No.: 107428
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2021.107428 , , , :
Effects of Fumed Silica on Thixotropic Behavior and Processing Window by UV-Assisted Direct Ink Writing
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14153107 , , :
Review on mechanical joining by plastic deformation
In: Journal of Advanced Joining Processes (2022)
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2022.100113 , , , , , , , , , , , , , , , , , , , , , , , , :
In-situ leakage behavior of polymer-metal hybrids under mechanical load
In: International Polymer Processing (2022)
ISSN: 0930-777X
DOI: 10.1515/ipp-2022-4229 , :
Reducing component stress during encapsulation of electronics: a simulative examination of thermoplastic foam injection molding
In: Journal of Polymer Engineering (2022)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2022-0150 , :
Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets
In: Sensors 22 (2022), Article No.: 1269
ISSN: 1424-8220
DOI: 10.3390/s22031269 , , , :
Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
In: Journal of Advanced Joining Processes 5 (2022), Article No.: 100084
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2021.100084 , :
Joining of steel/CFRT-hybrid parts via non-rotational symmetric cold formed pin structures
Hybrid 2022 (Leoben, 20th July 2022 - 22nd July 2022) , :
Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
In: Applied Sciences 12 (2022)
ISSN: 2076-3417
DOI: 10.3390/app12104962 , , , :
Druckabhängige Orientierungsrelaxation im dynamisch temperierten Spritzprägen
In: Zeitschrift Kunststofftechnik 1 (2022), p. 1-23
ISSN: 1864-2217
DOI: 10.3139/o999.01012022 , :
High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control
In: Polymers 14 (2022), Article No.: 2799
ISSN: 2073-4360
DOI: 10.3390/polym14142799 , , , , :
Possibilities in Recycling Magnetic Materials in Applications of Polymer-Bonded Magnets
In: Magnetism 2 (2022), p. 251-270
ISSN: 2673-8724
DOI: 10.3390/magnetism2030019 , :
Simulationsgestützte Auslegung eines Spritzgießwerkzeugs zur Herstellung von kunststoffgebundenen Dauermagneten auf Duroplast Basis
In: Werkstoffe in der Fertigung (2022), p. 22-26
ISSN: 0939-2629 , :
Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
In: Magnetism 2 (2022), p. 211-228
ISSN: 2673-8724
DOI: 10.3390/magnetism2030016 , :
Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets
In: Polymers 14 (2022), p. 5352
ISSN: 2073-4360
DOI: 10.3390/polym14245352 , , , :
Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies
In: Polymers 14 (2022), Article No.: 1428
ISSN: 2073-4360
DOI: 10.3390/polym14071428 , , :
Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers
In: Polymers 14 (2022), Article No.: 885
ISSN: 2073-4360
DOI: 10.3390/polym14050885 , , :
The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three-dimensional foam components
In: Polymer Engineering and Science (2022)
ISSN: 0032-3888
DOI: 10.1002/pen.26112 , , , , , , :
In Situ Test Rig for the Measurement of the Operating Characteristics of Polymer Gears
In: Zeitschrift Kunststofftechnik 1 (2022), p. 93-116
ISSN: 1864-2217
DOI: 10.3139/O999.02022022 , , :
Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact
In: Journal of Polymer Engineering (2022)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2022-0231 , , , , , , :
The Impact of beta-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14153168 , :
Expandable Graphite as a Multifunctional Flame-Retarding Additive for Highly Filled Thermal Conductive Polymer Formulations
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14081613 , , , , :
Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14061263 , , , :
Mechanical properties of thermoformed multilayer parts containing non thermoformable materials
In: Journal of Plastic Film & Sheeting (2022), p. 875608792210939
ISSN: 8756-0879
DOI: 10.1177/87560879221093977 , :
Two Layer Sheets for Processing Post-Consumer Materials
In: Polymers 14 (2022)
ISSN: 2073-4360
DOI: 10.3390/polym14081507 , :
Biaxial Elongation Behavior in Partially Molted State of Two-Layer Sheets Containing Postconsumer Material
In: Polymers 14 (2022), p. 3172
ISSN: 2073-4360
DOI: 10.3390/polym14153172 , , :
Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien
In: Konstruktion (2022), p. 70-74
ISSN: 0720-5953 , , :
Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien
In: Konstruktion 74 (2022), p. 70-74
ISSN: 0720-5953
DOI: 10.37544/0720-5953-2022-10-70 , , :
Filling Behavior in Joining Using Pin-like Structures
In: Polymers 14 (2022), p. 3083
ISSN: 2073-4360
DOI: 10.3390/polym14153083 , :
Separation of Multi-Material Polymer Combinations Produced by Joining Using Pin-like Structures
In: Journal of Manufacturing and Materials Processing 6 (2022), Article No.: 13
ISSN: 2504-4494
DOI: 10.3390/jmmp6010013 , :
Weld peculiarities of infrared-welded joints between laser-sintered and injection-moulded components
In: Joining Plastics - Fügen von Kunststoffen 16 (2022), p. 166-173
ISSN: 1864-3450 , :
Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles
In: International Journal of Heat and Mass Transfer 191 (2022)
ISSN: 0017-9310
DOI: 10.1016/j.ijheatmasstransfer.2022.122815 , , , , :
Investigation of efficient mixing enhancement in planar micromixers with short mixing length
In: Chemical Engineering and Processing 171 (2022), Article No.: 108747
ISSN: 0255-2701
DOI: 10.1016/j.cep.2021.108747 , , , , :
An investigation of chaotic mixing behavior in a planar microfluidic mixer
In: Physics of Fluids 34 (2022)
ISSN: 1070-6631
DOI: 10.1063/5.0082831 , , , , :
Provision of cross-domain knowledge in mechanical joining using ontologies
In: Production Engineering (2022), p. 327 - 338
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01117-y , , , , , , , , :
2021
In situ curing and bonding of epoxy prepregs in epoxy thermoset injection molding
In: International Journal of Advanced Manufacturing Technology (2021)
ISSN: 0268-3768
DOI: 10.1007/s00170-021-07838-1 , :
Hochgefüllte Kunststoffe: Neue Potenziale durch den Einsatz von Füllstoffen zur gezielten Eigenschaftsmodifikation
In: Jahresmagazin Ingenieurwissenschaften (2021), p. 38-45
ISSN: 1618-8357
Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2021/10/096-650_WAK-Kunststoff_2021_s.pdf , , , , , , , , :
Development of material-adapted processing strategies for laser sintering of polyamide 12
In: Advanced Industrial and Engineering Polymer Research (2021)
DOI: 10.1016/j.aiepr.2021.05.002 , , , :
Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen
27. Technomer - Fachtagung über Verarbeitung und Anwendung von Polymeren (Technische Universität Chemnitz, 4th November 2021 - 5th November 2021) , , :
Temperaturfeldhomogenisierung durch fraktale Belichtungsstrategien im Lasersintern von Kunststoffen
Rapid.Tech (, 22nd June 2021 - 23rd June 2021)
In: Proceedings of the 17th Rapid.Tech Conference 2021
DOI: 10.3139/9783446471733.015 , , :
Enhanced the thermal conductivity of polydimethylsiloxane via a three-dimensional hybrid boron nitride@silver nanowires thermal network filler
In: Polymers 13 (2021), p. 1-10
ISSN: 2073-4360
DOI: 10.3390/polym13020248 , , , , , :
Multi-contact hybrid thermal conductive filler Al2O3@AgNPs optimized three-dimensional thermal network for flexible thermal interface materials
In: Journal of Applied Polymer Science (2021)
ISSN: 0021-8995
DOI: 10.1002/app.50889 , , , , , :
Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften
Rapid.Tech 2021 (, 22nd June 2021 - 23rd June 2021)
In: Proceedings of the 17th Rapid.Tech Conference 2021
DOI: 10.3139/9783446471733.002 , , , :
Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
In: Polymers 13 (2021), Article No.: 3144
ISSN: 2073-4360
DOI: 10.3390/polym13183144 , :
Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network
In: European Polymer Journal 160 (2021)
ISSN: 0014-3057
DOI: 10.1016/j.eurpolymj.2021.110768 , , , , , , :
Low-stress over-molding of media-tight electronics using thermoplastic foam injection molding
In: Polymer Engineering and Science (2021)
ISSN: 1548-2634
DOI: 10.1002/pen.25672 , :
Rapid Enrichment of Submicron Particles within a Spinning Droplet Driven by a Unidirectional Acoustic Transducer
In: Analytical Chemistry (2021)
ISSN: 0003-2700
DOI: 10.1021/acs.analchem.1c02914 , , , , , :
Increasing the performance of continuous compression moulding by local pressure adaption
In: Advanced Manufacturing: Polymer and Composites Science (2021)
ISSN: 2055-0340
DOI: 10.1080/20550340.2021.1888209 , , , , , :
Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
In: Joining Plastics - Fügen von Kunststoffen (2021), p. 177-183
ISSN: 1864-3450 , , :
Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
In: Applied Composite Materials (2021)
ISSN: 0929-189X
DOI: 10.1007/s10443-021-09892-0 , , , , , :
Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics
In: Journal of Composites Science 5 (2021), Article No.: 239
ISSN: 2504-477X
DOI: 10.3390/jcs5090239 , , , :
Extension of the Stoney formula for the incremental stress of thin films
In: Applied Physics Letters 118 (2021), Article No.: 091604
ISSN: 0003-6951
DOI: 10.1063/5.0038257 , , , , :
A dyciandiamine-based methacrylate-epoxy dual-cure blend-system for stereolithography
In: Polymers 13 (2021), Article No.: 3139
ISSN: 2073-4360
DOI: 10.3390/polym13183139 , :
Isotropy of mechanical properties and environmental stress crack sensitivity in injection- and injection-compression molding of polystyrene with different mold temperature
In: Polymer Engineering and Science (2021), p. 1-10
ISSN: 0032-3888
DOI: 10.1002/pen.25793 , :
Pressure Equilibrium Time of a Cyclic-Olefin Copolymer
In: Polymers 13 (2021), Article No.: 15
ISSN: 2073-4360
DOI: 10.3390/polym13142309 , :
Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing
In: Journal of Materials Engineering and Performance (2021)
ISSN: 1059-9495
DOI: 10.1007/s11665-021-06271-5 , , , , :
Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
In: Production Engineering (2021)
ISSN: 0944-6524
DOI: 10.1007/s11740-021-01093-9 , , , :
Correlation between the Flow and Curing Behavior of Hard Magnetic Fillers in Thermosets and the Magnetic Properties
In: Magnetism (2021), p. 37-57
ISSN: 2673-8724
DOI: 10.3390/magnetism1010004 , :
Injection Moulding of Multipolar Polymer-Bonded Magnets into Soft Magnetic Inserts for Rotors in Reluctance Motors
In: Magnetism (2021), p. 3-21
ISSN: 2673-8724
DOI: 10.3390/magnetism1010004 , :
Fertigung eines Spritzgießwerkzeuges zur Herstellung von Flusssperren aus kunststoffgebundenen Dauermagneten in einem Synchron-Reluktanzmotor
In: Werkstoffe in der Fertigung (2021)
ISSN: 0939-2629 , , :
Simulative study of polymeric core-shell foam particles for the enlargement of the material portfolio in 3-D high-frequency welding
In: Polymer Engineering and Science (2021)
ISSN: 0032-3888
DOI: 10.1002/pen.25861 , , :
Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity - Theory and Modelling
In: International Polymer Processing 36 (2021), p. 423-434
ISSN: 0930-777X
DOI: 10.1515/ipp-2020-4020 , , :
Expandable Graphite for Flame Retardant PA6 Applications
In: Polymers 13 (2021), Article No.: 2733
ISSN: 2073-4360
DOI: 10.3390/polym13162733 , , , :
A synergistic flame retardant system based on expandable graphite, aluminum (Diethyl-)polyphospinate and melamine polyphosphate for polyamide 6
In: Polymers 13 (2021), Article No.: 2712
ISSN: 2073-4360
DOI: 10.3390/polym13162712 , , , :
Multilayer sheets for thermoforming non thermoformable polymers
In: Journal of Plastic Film & Sheeting (2021)
ISSN: 8756-0879
DOI: 10.1177/87560879211037387 , :
Design criteria for the pin-foot ratio for joining adhesion-incompatible polymers using pin-like structures in vibration welding process
In: Journal of Polymer Engineering (2021)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2021-0199 , :
New Considerations on the Determination of the Apparent Shear Viscosity of Polymer Melt with Micro Capillary Dies
In: Polymers 13 (2021)
ISSN: 2073-4360
DOI: 10.3390/polym13244451 , , , , :
2020
The influence of mold temperature on thermoset in-mold forming
In: Journal of Polymer Engineering (2020)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0322 , :
The Impact of Examples on Creativity: Gender Differences in Fixation Effects
In: Brem A., Bican P., Wimschneider C. (ed.): Gender Differences in Technology and Innovation Management - Insights from Experimental Research, München: De Gruyter Studies in Innovation and Entrepreneurship, 2020, p. 7-28
ISBN: 978-3-11-059079-1
DOI: 10.1515/9783110593952-002 , :
Infrared monitoring of modified hatching strategies for laser sintering of polymers
11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6th September 2020 - 10th September 2020)
In: Procedia CIRP 2020
DOI: 10.1016/j.procir.2020.09.018 , :
Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers
1st International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020 (, 19th May 2020 - 20th May 2020)
In: Lecture Notes in Mechanical Engineering 2020
DOI: 10.1007/978-3-030-70332-5_12 , , :
Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
In: Measurement Science and Technology 31 (2020), p. 1-14
ISSN: 1361-6501
DOI: 10.1088/1361-6501/ab89e2 , , , , , , , , , , , :
Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum
In: Additive Manufacturing 33 (2020), Article No.: 101135
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101135 , , , :
Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC
In: Polymers 12 (2020)
ISSN: 2073-4360
DOI: 10.3390/polym12051080 , :
Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics
In: Journal of Composites Science 4 (2020)
ISSN: 2504-477X
DOI: 10.3390/jcs4030136 , , , , :
Workflow for enhanced fiber orientation prediction of short fiber-reinforced thermoplastics
SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals (, 30th March 2020 - 5th May 2020)
In: Annual Technical Conference - ANTEC, Conference Proceedings 2020 , , , , :
Efficient parameter identification for macroscopic fiber orientation models with experimental data and a mechanistic fiber simulation
35th International Conference of the Polymer Processing Society, PPS 2019 (Cesme-Izmir, 26th May 2019 - 30th May 2019)
In: Fevzi Cakmak Cebeci, Yusuf Z. Menceloglu, Serkan Unal, Yakup Ulcer (ed.): AIP Conference Proceedings 2020
DOI: 10.1063/1.5142965 , , , , , :
Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data
In: Polymer Composites (2020)
ISSN: 0272-8397
DOI: 10.1002/pc.25553 , , , , , :
The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
In: Polymer Testing (2020)
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2019.106313 , , :
ZnO nanowire-decorated Al2O3hybrids for improving the thermal conductivity of polymer composites
In: Journal of Materials Chemistry C 8 (2020), p. 5380-5388
ISSN: 2050-7526
DOI: 10.1039/c9tc06805h , , , , , , :
Analysis of Contributive Forces In Intra-Laminar Shear of Continuous Fiber Reinforced Thermoplastics
ANTEC® 2020: The Virtual Edition Proceedings
In: ANTEC® 2020: The Virtual Edition Proceedings 2020 , :
High Speed Forming of Continuous Fiber Reinforced Thermoplastics
In: Applied Composite Materials (2020)
ISSN: 0929-189X
DOI: 10.1007/s10443-020-09794-7 , , , , :
Shear behavior of woven and non-crimp fabric based thermoplastic composites at near-processing conditions
In: Composites Part B-Engineering 185 (2020), Article No.: 107761
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2020.107761 , , :
Determination of the single point uncertainty of customized polymer gear wheels using structured-light scanning with various polygonization settings
In: Journal of Sensors and Sensor Systems 9 (2020), p. 51-60
ISSN: 2194-8771
DOI: 10.5194/jsss-9-51-2020 , , , :
Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties
In: Additive Manufacturing 32 (2020), Article No.: 101002
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.101002 , , , , , , , :
Media-Tight Polymer-Polymer Assemblies By Means of Sintered Powder Layer in Assembly Injection Moulding
In: Procedia Manufacturing 47 (2020), p. 362-367
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.04.286 , , :
In Situ Stress Measurement of Ni Electrodeposition Using Lateral Shearing Interferometry
In: Journal of The Electrochemical Society 167 (2020)
ISSN: 0013-4651
DOI: 10.1149/1945-7111/abcb78 , , , , , :
Anwendungsoptimierte Druckverfestigung
In: Zeitschrift Kunststofftechnik 2020 (2020), p. 108-132
ISSN: 1864-2217
DOI: 10.3139/O999.01042020 , :
Application optimized compression induced solidification
In: International Journal of Plastics Technology 16 (2020)
ISSN: 0972-656X , :
Compression-Induced Solidification
In: Polymers 12 (2020), Article No.: 488
ISSN: 2073-4360
DOI: 10.3390/polym12020488 , , :
Dynamic compression induced solidification
In: Polymers 12 (2020), Article No.: 488
ISSN: 2073-4360
DOI: 10.3390/polym12020488 , , :
Einfluss von Prozessparametern auf die Eigenschaften von Rotoren
Fachtagung Leitfähige Kunststoffe des Kunststoffinstituts Lüdenscheid , :
Flame-retardant polyamide powder for laser sintering: Powder characterization, processing behavior and component properties
In: Polymers 12 (2020), Article No.: 1697
ISSN: 2073-4360
DOI: 10.3390/POLYM12081697 , , :
Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement
Summer School Toleranzmanagement (Erlangen, 28th September 2020 - 28th September 2020)
In: Sandro Wartzack (ed.): Beiträge zur 4. Summer School 2020 , , , , :
Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
In: Additive Manufacturing (2020)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101676 , , , , , :
A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing
43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley, 14th May 2020 - 15th May 2020)
In: Proceedings of the International Spring Seminar on Electronics Technology 2020
DOI: 10.1109/ISSE49702.2020.9121044 , , , , , :
Particle Size Related Effects of Multi-Component Flame-Retardant Systems in Poly(Butadiene Terephtalate)
In: Polymers 12 (2020)
ISSN: 2073-4360
DOI: 10.3390/polym12061315 , , , :
Assistance Machine Function for BMC Injection Molding
International Symposium on Plastics Technology (Aachen)
In: ADVANCES IN POLYMER PROCESSING 2020, BERLIN: 2020
DOI: 10.1007/978-3-662-60809-8_15 , , :
Kraftflussgerechte Fused Layer Modeling-Strukturen mit kurzfaserverstärktem Filament
In: Konstruktion (2020), p. 76-82
ISSN: 0720-5953 , , , :
Construction of micro-thermal conductive network of self-assembled CNTs hybrids with 1D–0D structure
In: Journal of Thermal Analysis and Calorimetry (2020)
ISSN: 1388-6150
DOI: 10.1007/s10973-020-10291-z , , :
Highly thermally conductive polybenzoxazine composites based on boron nitride flakes deposited with copper particles
In: Materials & Design 191 (2020), Article No.: 108698
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108698 , , , , , , , , :
Improvement of thermal conductivity and mechanical properties for polybenzoxazine composites via incorporation of epoxy resin and segregated structure
In: Materials Research Express 7 (2020)
ISSN: 2053-1591
DOI: 10.1088/2053-1591/abb263 , , , , , :
Achieving a 3D thermally conductive while electrically insulating network in polybenzoxazine with a novel hybrid filler composed of boron nitride and carbon nanotubes
In: Polymers 12 (2020), p. 1-18
ISSN: 2073-4360
DOI: 10.3390/polym12102331 , , , , , , :
Air inclusions in the polymer melt functioning as intrinsic physical blowing agents for the generation of foams in rotational molding
In: Cellular Polymers (2020)
ISSN: 0262-4893
DOI: 10.1177/0262489320920070 , , , , :
Elongation behaviour of filled semi-crystalline polymers in thermoforming
In: Advances in Materials and Processing Technologies 6 (2020), p. 647-660
ISSN: 2374-068X
DOI: 10.1080/2374068X.2020.1734348 , , :
Influence of the Structuring-Tool Geometry on Form-Fit Joining by Use of Pin-Like Structures in Vibration Welding
In: Procedia Manufacturing 47 (2020), p. 375-382
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.04.292 , :
Joining laser-sintered with injection-molded parts made of PA12 using infrared welding
In: Polymer Engineering and Science (2020)
ISSN: 0032-3888
DOI: 10.1002/pen.25596 , :
Weld seam morphology and bond strength of infrared and vibration welded SLS parts of polyamide 12 as a function of the layer build-up direction and the welding process
In: Additive Manufacturing 36 (2020), Article No.: 101451
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101451 , , :
Curing behavior of thermosets for the use in a combined selective laser sintering process of polymers
29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 (Austin, TX, 13th August 2018 - 15th August 2018)
In: Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 2020 , :
Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing
In: Polymers (2020)
ISSN: 2073-4360
DOI: 10.3390/polym12091917
URL: https://www.mdpi.com/2073-4360/12/9/1917 , , , , , :
Atomistic investigation on the wetting behavior and interfacial joining of polymer-metal interface
In: Polymers 12 (2020), Article No.: 1696
ISSN: 2073-4360
DOI: 10.3390/POLYM12081696 , , , , :
Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage
In: Materials Research Express 7 (2020)
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab8584 , , , :
Influences of Morphology Controllable Alumina on the Thermal Conductivity of Composites of Silicone Rubber 形貌可控氧化铝对硅橡胶复合材料导热性能的影响
In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 36 (2020), p. 128-134 and 141
ISSN: 1000-7555
DOI: 10.16865/j.cnki.1000-7555.2020.0082 , , , , :
2019
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
In: Chemical Engineering Science 197 (2019), p. 11-25
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.11.051 , , , , , , , , , :
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf , , , , , , :
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf , , , , , , :
Reduction of overmolding of Thermoset In-Mould produced hybrid components
SPE Antec (Detroit, 18th March 2019 - 20th March 2019)
In: Proceedings of SPE ANTEC 2019 2019 , :
Integrative manufacturing of thermoset injection molding components with continous fiber-reinforcement
In: Zeitschrift Kunststofftechnik 15 (2019), p. 169-187
ISSN: 1864-2217
DOI: 10.3139/O999.03022019 , , :
A novel approach for understanding laser sintering of polymers
In: Additive Manufacturing 27 (2019), p. 379-388
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.03.012 , , , :
Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride
In: Fire and Materials (2019)
ISSN: 0308-0501
DOI: 10.1002/fam.2753 , , , , :
Investigation of radiation crosslinking as performance enhancement for thermoplastic spur gears
VDI Gears 2019 (München, 18th September 2019 - 18th September 2019)
In: VDI-Berichte 2019 2019 , :
Micrometer accurate measurement of tooth wear
In: Kunststoffe International 109 (2019), p. 107-109
ISSN: 1862-4243 , , , :
Kunststoffe in tribologischen Systemen - Forschung an der FAU Erlangen-Nürnberg
2019
(WAK Jahresmagazin 2019) , , , (ed.):
A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
PPS (Polymer Processing Society) (Dresden, 26th June 2017 - 29th June 2017)
In: AIP Conference Proceedings 2055 2019
DOI: 10.1063/1.5084907 , , , :
Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers
In: Optics and Laser Technology 109 (2019), p. 569-576
ISSN: 0030-3992
DOI: 10.1016/j.optlastec.2018.08.010 , , , :
The MyoRobot technology discloses a premature biomechanical decay of skeletal muscle fiber bundles derived from R349P desminopathy mice
In: Scientific Reports 9 (2019), Article No.: 10769
ISSN: 2045-2322
DOI: 10.1038/s41598-019-46723-6 , , , , , , , , , , , , , , , :
Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen
16th Rapid.Tech (Erfurt, 25th June 2019 - 27th June 2019)
In: Proceedings of the 16th Rapid.Tech Conference 2019
DOI: 10.3139/9783446462441.018 , , :
Interaktion der Ausgangspulverkennwerte und der Belichtungsparameter im selektiven Laserstrahlschmelzen von Kunststoffen auf resultierende Bauteileigenschaften
16th Rapid.Tech (Erfurt, 25th June 2019 - 27th June 2019)
DOI: 10.3139/9783446462441.020 , , :
Characterization of microchannel replicability of injection molded electrophoresis microfluidic chips
In: Polymers 11 (2019), Article No.: 608
ISSN: 2073-4360
DOI: 10.3390/polym11040608 , , , , , :
Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0098 , , , :
Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
22nd International ESAFORM Conference on Material Forming (ESAFORM 2019) (Vitoria-Gasteiz, 8th May 2019 - 8th May 2019)
DOI: 10.1063/1.5112570 , , , , :
Improvement of the Reproduction Accuracy of a Defined Pole Length of Injection Molded Encoder Wheels
Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27th June 2017 - 29th June 2017)
In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS, MELVILLE: 2019
DOI: 10.1063/1.5084874 , :
On the Determination of the Enthalpy of Fusion of α-Crystalline Isotactic Polypropylene Using Differential Scanning Calorimetry, X-Ray Diffraction, and Fourier-Transform Infrared Spectroscopy: An Old Story Revisited
In: Advanced Engineering Materials (2019), Article No.: 1900796
ISSN: 1438-1656
DOI: 10.1002/adem.201900796
URL: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.201900796 , , , :
Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12th December 2019 - 12th December 2019)
In: Vom Pulver zum multifunktionalen Bauteil 2019 , :
Selective laser sintering of copper filled polyamide 12: powder properties and process behavior
In: Polymer Composites 40 (2019), p. 1801-1809
ISSN: 0272-8397
DOI: 10.1002/pc.24940 , , , :
Determination of the fundamental dimension development in building direction for laser-sintered parts
In: Journal of Polymer Engineering 39 (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2018-0204 , :
Developing a patient individualized flexible silicone implant using SLS and vacuum die casting
In: AIP Conference Proceedings 2055 (2019), Article No.: 140005
ISSN: 0094-243X
DOI: 10.1063/1.5084908 , , , , , :
Developing a Patient Individualized Flexible Silicone Implant using SLS and Vacuum Die Casting
Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27th June 2017 - 29th June 2017)
In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS, MELVILLE: 2019
DOI: 10.1063/1.5084908 , , , , , :
A new approach for assessing the deflection and bending properties of continuous fiber reinforced thermoplastics under processing conditions
In: Polymer Testing 74 (2019), p. 77-85
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2018.12.024 , :
Separation of locally determined work piece deviations and measurement uncertainties for structured-light scanning of customized polymer gear wheels
20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg, 25th June 2019 - 26th June 2019)
In: AMA Service GmbH (ed.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019
DOI: 10.5162/sensoren2019/6.4.1
URL: https://www.ama-science.org/proceedings/details/3467 , , , , :
Haftungsinkompatible Kunststoff-Kunststoff-Verbunde mit gesteigerter Mediendichtheit mittels aufgesinterter Mikrostrukturen
In: Zeitschrift Kunststofftechnik 15 (2019), p. 314-334
ISSN: 1864-2217
DOI: 10.3139/o999.03042019 , , , :
Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models *
In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2019
DOI: 10.1109/EMBC.2019.8856888 , , , :
Targeted influencing of the mission-relevant component properties of cold-forged gearwheels
In: Konstruktion 2019 (2019), p. 94-98
ISSN: 0720-5953 , , , , , :
Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder
In: Konstruktion (2019), p. 94-98
ISSN: 0720-5953 , , , , , :
Analysis of the processing-pressure dependent refractive index of polycarbonate by transmission measurements of glass-filled specimen
In: Polymer Engineering and Science (2019)
ISSN: 0032-3888
DOI: 10.1002/pen , , :
Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
In: International Polymer Processing 34 (2019), p. 425-433
ISSN: 0930-777X
DOI: 10.3139/217.3802 , , :
Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern
In: Konstruktion 03/19 (2019), p. 75-81
ISSN: 0720-5953 , , :
Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern
In: Konstruktion 2019 (2019), p. 75-81
ISSN: 0720-5953
DOI: 10.37544/0720-5953-2019-03-75 , , :
Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0170 , , :
Development Of An Integrated Simulation Method For The Prediction Of Transmission Errors Of Injection Molded Spur Gears
22nd International Conference on Material Forming (ESAFORM 2019) (Vittoria-Gasteiz, 8th May 2019 - 8th May 2019)
DOI: 10.1063/1.5112663 , , , :
Development of a simulation method for the prediction of transmission errors of injection molded spur gears
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8th May 2019 - 10th May 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (ed.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112663 , , , :
Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen)
In: Industriekolloquium der Forschergruppe FOR 2271 2019 , , , , :
New Approach on the Allocation of Wear Allowances - a Case Study
22nd International Conference on Engineering Design (ICED19) (Delft, 5th August 2019 - 8th August 2019)
DOI: 10.1017/dsi.2019.358 , , , , , , :
Effect of Surface Structure on Run-in Wear in Steel-Polyamide Gear Sets
In: Zeitschrift Kunststofftechnik 15 (2019), p. 370-391
ISSN: 1864-2217
DOI: 10.3139/O999.03052019 , , , :
A Practical Approach for Validation of Aptitude of Sized Carbon Fibers for the In-Mould -Impregnation Process
In: American Journal of Mechanical and Materials Engineering 3 (2019), p. 11-19
ISSN: 2639-9628
DOI: 10.11648/j.ajmme.20190301.12 , , , , :
Influence of Vacuum on the Porosity and Mechanical Properties in Rotational Molding
In: Polymer Engineering and Science (2019)
ISSN: 0032-3888
DOI: 10.1002/pen.25152 , , , , :
Study on thermal conductive PA6 composites with 3-dimensional structured boron nitride hybrids
In: Journal of Applied Polymer Science 136 (2019)
ISSN: 0021-8995
DOI: 10.1002/app.47630 , , , , , :
Effects of CNTs/BN Hybrids on the Thermal Conductivity of PA6 Composite and Its Mechanism 碳纳米管/氮化硼混杂填料对尼龙6导热性能的影响及其机理
In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 35 (2019), p. 42-47
ISSN: 1000-7555
DOI: 10.16865/j.cnki.1000-7555.2019.0069 , , , , , :
Radiation Crosslinking of Films - New Applications in the Thermoforming of Filled Materials
In: Kunststoffe International 10/2019 (2019), p. 112-116
ISSN: 1862-4243 , , :
Strahlenvernetzung von Folien - Neue Anwendungen bei der Verarbeitung gefüllter Materialien im Thermoformprozess
In: Kunststoffe 10/2019 (2019), p. 176-179
ISSN: 0023-5563 , , :
Influence of an Increased Fiber Filler Content on the Elongational Behaviour of Filled Films in the Thermoforming Process
In: American Journal of Mechanical and Materials Engineering 3 (2019), p. 25-35
ISSN: 2639-9628
DOI: 10.11648/j.ajmme.20190302.11 , , :
Influence of radiation-crosslinking on the elongation behaviour of glass-fibre-filled sheets in the thermoforming process
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0050 , , , :
Influence of the thermomechanical properties on the joining of adhesion incompatible polymers by form-fit using the vibration welding process
In: eXPRESS Polymer Letters 13 (2019), p. 365-378
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2019.30 , , :
Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers
In: Journal of Applied Polymer Science 136 (2019), Article No.: 46850
ISSN: 0021-8995
DOI: 10.1002/app.46850 , :
Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties
In: Additive Manufacturing 25 (2019)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2018.11.007 , :
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12th December 2019 - 12th December 2019)
In: Dietmar Drummer (ed.): Vom Pulver zum multifunktionalen Bauteil 2019 , , , , , , , , :
Untersuchung zur Bedeutung der Schichtanzahl für Struktur und Eigenschaften von LS-Kunststoffbauteilen
Technomer 2019 (Chemnitz, 7th November 2019 - 8th November 2019) , :
Mechanisches Verhalten lasergesinterter PA12 Bauteile bei variierenden statischen Belastungsgeschwindigkeiten und -dauern
16th Rapid.Tech (Erfurt, 25th June 2019 - 27th June 2019)
In: Proceedings of the 16th Rapid.Tech Conference 2019
DOI: 10.3139/9783446462441.013 , , :
Influence of chemical postprocessing on mechanical properties of laser-sintered polyamide 12 parts
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0110 , , , , , :
Understanding the influence of energy-density on the layer-dependent part properties in laser-sintering of PA12
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, Texas)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 , , :
Processing LDS-Circuit Boards by Selective Laser Sintering
In: International Polymer Processing 34 (2019), p. 248-254
ISSN: 0930-777X
DOI: 10.3139/217.3670 , , , , :
Synergistic construction of thermally conductive network in polybenzoxazine with boron nitride hybrid fillers
In: Materials Research Express 6 (2019)
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab6e7d , , , , , :
The effect of temperature and strain rate on the interfacial behavior of glass fiber reinforced polypropylene composites: A molecular dynamics study
In: Polymers 11 (2019), Article No.: 1766
ISSN: 2073-4360
DOI: 10.3390/polym11111766 , , , , :
Influence of filler content and filler size on the curing kinetics of an epoxy resin
In: Polymers 11 (2019), Article No.: 1797
ISSN: 2073-4360
DOI: 10.3390/polym11111797 , :
Investigation of the effects of pre-cross-linked thermoset molding compounds on weld line strength in injection molding
In: International Journal of Advanced Manufacturing Technology (2019)
ISSN: 0268-3768
DOI: 10.1007/s00170-019-04306-9 , , :
Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: A molecular dynamics simulation study
In: Applied Surface Science 478 (2019), p. 680-689
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2019.01.286 , , , :
Molecular Dynamics Simulation on the Effect of Bonding Pressure on Thermal Bonding of Polymer Microfluidic Chip
In: Polymers 11 (2019)
ISSN: 2073-4360
DOI: 10.3390/polym11030557 , , , :
Effects of process conditions on the heat transfer coefficient at the polymer-mold interface and tensile strength of thin-wall injection molding parts
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2018-0369 , , , , , :
2018
Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
In: Polymers 10 (2018), Article No.: 1373
ISSN: 2073-4360
DOI: 10.3390/polym10121373 , , , , , , :
Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11
6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12th December 2019 - 12th December 2019)
In: Dietmar Drummer (ed.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Erlangen: 2018 , , , , :
Selective laser melting of polymers: Influence of powder coating on mechanical part properties
In: Journal of Polymer Engineering 38 (2018), p. 667-674
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0133 , , , , , :
Additive Fertigung mit Kunststoffen: Potenziale, Entwicklungen und Trends
In: Spritzgießen 2018, VDI Verlag GMBH, 2018, p. 53-64 (VDI Berichte) , :
Effect of talc on the metal adhesion of laser-structured polymer parts
13th International Congress Molded Interconnect Devices (Würzburg, 26th September 2018 - 26th September 2018)
DOI: 10.1109/icmid.2018.8666940 , , , :
Influence of a locally variable mold temperature on injection molded thin-wall components
In: Journal of Polymer Engineering 38 (2018), p. 475-481
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0100 , , , :
Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
7th International Conference on Additive Technologies - iCAT 2018 (Maribor, 10th October 2018 - 11th October 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 , , , , :
Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13th December 2018 - 13th December 2018) , , , , , , , :
Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden
In: Zeitschrift Kunststofftechnik 14 (2018), p. 211-232
ISSN: 1864-2217
DOI: 10.3139/o999.03032018 , , , :
Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - creep modelling
fan 2018 (Darmstadt, 18th April 2018 - 20th April 2018) , , , :
Berücksichtigung des Druckniveaus bei der Viskositätsermittlung im Hochdruckkapillarrheometer
9. CONNECT! European Moldflow User Meeting 2018 (Frankfurt, 5th June 2018 - 6th June 2018) , , :
Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers
6. Industriekolloquium des SFB 814 (Nürnberg, 13th December 2018 - 13th December 2018)
In: 6. Industriekolloquium des SFB 814, 2018 , , , :
Research on thermal contact resistance between polymer and mold during thin-wall injection molding 薄壁注射成型中聚合物与模具间接触热阻研究
In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) 49 (2018), p. 1381-1386
ISSN: 1672-7207
DOI: 10.11817/j.issn.1672-7207.2018.06.010 , , , , :
Electrochemical treatment of metal inserts for subsequent assembly injection molding of tight electronic systems
In: Journal of Polymer Engineering (2018)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0432 , :
One-step Electrochemical Treatment of Metal Inserts for Tight Polymer-Metal Hybrid Applications
SPE Antec 2018 (Orlando) , :
Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties
7th International Conference on Additive Technologies - iCAT2018 (Maribor, 10th October 2018 - 11th October 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 , , , :
Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - numerical and experimental approach
fan 2018 (Darmstadt, 18th April 2018 - 20th April 2018) , , , :
Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111)
In: ChemPhysChem 19 (2018), p. 2978-2984
ISSN: 1439-4235
DOI: 10.1002/cphc.201800773 , , , :
Usability of dielectric properties for evaluation and research of deconsolidation of endless fiber-reinforced thermoplastics
In: Journal of Polymer Engineering 38 (2018)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0395 , :
Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics
In: Composites Part B-Engineering 142 (2018), p. 95-101
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2018.01.009 , , , :
Failure criterion for PA12 SLS additive manufactured parts
In: Additive Manufacturing 21 (2018), p. 619-627
ISSN: 2214-7810
DOI: 10.1016/j.addma.2018.04.008 , , , , :
Modeling of Laser Beam Absorption in a Polymer Powder Bed
In: Polymers 10 (2018)
ISSN: 2073-4360
DOI: 10.3390/polym10070784 , , , , , :
Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models
2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai, 21st November 2018 - 24th November 2018)
In: BMEiCON - 2018, [Piscataway, New Jersey]: 2018
DOI: 10.1109/BMEiCON.2018.8609983 , , , :
Stabilization of BMC injection molding by process control measures
2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018 (Orlando, FL, USA, 7th May 2018 - 10th May 2018)
In: Annual Technical Conference - ANTEC, Conference Proceedings 2018 , , , :
Enhanced thermal conductivity and flame retardancy of polyamide 6/flame retardant composites with hexagonal boron nitride
In: Journal of Polymer Engineering (2018)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0414 , , , , , :
Analysis of the processing-pressure dependent refractive index of Poly(methyl methacrylate) by transmission measurements of glass-filled specimen
In: Polymer Testing 71 (2018), p. 217-222
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2018.09.011 , :
Light scattering and optical performance of glass-particle filled matrices with similar refractive index
In: Journal of Composite Materials 52 (2018)
ISSN: 0021-9983
DOI: 10.1177/0021998318778889 , :
Light scattering of glass-particle filled matrices with similar refractive index
In: Journal of Composite Materials (2018)
ISSN: 0021-9983
DOI: 10.1177/0021998318778889 , :
Nanofiller materials for transparent polymer composites: Influences on the properties and on the transparency—A review
In: Journal of Thermoplastic Composite Materials (2018), p. 1-19
ISSN: 0892-7057
DOI: 10.1177/0892705718797157 , :
Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites
In: International Polymer Processing 33 (2018), p. 706-713
ISSN: 0930-777X
DOI: 10.3139/217.3518 , , , :
Untersuchung zum Vibrationsschweißen von laserstrahlgesinterten Bauteilen
In: Joining Plastics - Fügen von Kunststoffen 01 (2018), p. 22-28
ISSN: 1864-3450 , , :
Analysis of time dependent thermal properties for high rates in selective laser sintering
In: Rapid Prototyping Journal 24 (2018), p. 894-900
ISSN: 1355-2546
DOI: 10.1108/RPJ-01-2017-0013 , , , :
Curing beharior of thermosets for the use in a combined selective laser sintering process
9th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 13th August 2018 - 15th August 2018)
In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2018 , :
Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers
In: JOM Journal of the Minerals, Metals and Materials Society (2018), p. 1-8
ISSN: 1047-4838
DOI: 10.1007/s11837-018-3226-0 , :
Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization
In: Procedia CIRP 74 (2018), p. 238-243
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.08.102 , , , :
Tribological anisotropy of selective laser sintered PA12 parts
In: Polymer Testing 70 (2018), p. 117-126
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2018.06.028 , :
Understanding hatch-dependent part properties in SLS
International Solid Freeform Fabrication Symposium (Austin, 13th August 2018 - 15th August 2018)
In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium 2018 , :
Einfluss des Schichtaufbaus auf das mechanische Verhalten von selektiv lasergesinterten Bauteilen
Rapid Tech 2018 (Erfurt, 5th June 2018 - 7th June 2018)
DOI: 10.3139/9783446458123.016 , , :
Nonlinear material model for quasi-unidirectional woven composite accounting for viscoelastic, viscous deformation, and stiffness reduction
In: Polymers 10 (2018), Article No.: 903
ISSN: 2073-4360
DOI: 10.3390/polym10080903 , , :
Strain rate-dependent mechanical behavior of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
In: Polymer Testing 69 (2018), p. 276-285
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2018.05.033 , , :
Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
In: Composites Part B-Engineering 148 (2018), p. 180-187
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2018.04.058 , , :
Tensile Creep Behavior of Quasi-Unidirectional E-Glass Fabric Reinforced Polypropylene Composite
In: Polymers 10 (2018)
ISSN: 2073-4360
DOI: 10.3390/polym10060661 , , :
Effect of graphite on the flame retardancy and thermal conductivity of P-N flame retarding PA6
In: Journal of Applied Polymer Science (2018)
ISSN: 0021-8995
DOI: 10.1002/APP.46559 , , , , :
Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie
Rapid Tech (Erfurt, 5th June 2018 - 7th June 2018)
In: Proceedings of the 15th Rapid.Tech Conference 2018
DOI: 10.3139/9783446458123.019 , , , , , :
Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering
In: Polymers 10 (2018)
ISSN: 2073-4360
DOI: 10.3390/polym10020168 , , :
Thermal conductivity of aluminosilicate- and aluminum oxide-filled thermosets for injection molding: Effect of filler content, filler size and filler geometry
In: Polymers 10 (2018), Article No.: 457
ISSN: 2073-4360
DOI: 10.3390/polym10040457 , , :
Molecular dynamics simulation and experimental investigation of the geometrical morphology development of injection-molded nanopillars on polymethylmethacrylate surface
In: Computational Materials Science 149 (2018), p. 208-216
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2018.03.035 , , , :
2017
Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie
In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017), p. 985-1144 , , , , :
ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS
SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii, 6th February 2017 - 9th February 2017)
In: IEEE (ed.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017 , , , , , :
Influence of mold temperature and process time on the degree of cure of epoxy-based materials for thermoset injection molding and prepreg compression molding
In: Journal of Polymer Engineering (2017)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2016-0409 , , :
Early signs of architectural and biomechanical failure in isolated myofibers and immortalized myoblasts from desmin-mutant knock-in mice
In: Scientific Reports 7 (2017), p. 1391
ISSN: 2045-2322
DOI: 10.1038/s41598-017-01485-x , , , , , , , , , , , , , , , , , , :
Thermally Conductive Polymers Meet LED
In: Kunststoffe International 2017 (2017), p. 21-24
ISSN: 1862-4243 , , , , , :
Wärmeleitender Kunststoff trifft LED
In: Kunststoffe 1 (2017), p. 38-41
ISSN: 0023-5563 , , , , , :
Effect of flow lines on the metallization of laser structured polymer parts
SPE Antec 2017 (Anaheim, 8th May 2017 - 10th May 2017)
In: SPE Proceedings Antec 2017 , , , , , :
Effect of fillers on the metallization of laser-structured polymer parts
In: Journal of Polymer Engineering 37 (2017), p. 151-161
ISSN: 0334-6447 , , :
Einfluss der Werkzeugtemperatur auf die lokale Ausbildung der Bauteileigenschaften beim dynamisch temperierten Mikrospritzguss
8. Kolloquium Mikroproduktion (Bremen, 27th November 2017 - 28th November 2017)
In: 8. Kolloquium Mikroproduktion 2017 , :
Micro Components with Locally Different Properties Realized by Segmented Tempered Injection Molding
SPE Antec (Anaheim, 8th May 2017 - 10th May 2017)
In: SPE Proceedings Antec, Anaheim: 2017 , :
Crystallization and Component Properties of Polyamide 12 at Processing-Relevant Cooling Conditions
In: Polymer Engineering and Science 57 (2017), p. 450-457
ISSN: 0032-3888
DOI: 10.1002/pen.24441 , , :
Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time
In: Polymer Engineering and Science 57 (2017), p. 121-128
ISSN: 0032-3888
DOI: 10.1002/pen.24394 , , , , :
A novel fiber length measurement technique for discontinuous fiber-reinforced composites: A comparative study with existing methods
In: Polymer Composites (2017)
ISSN: 1548-0569
DOI: 10.1002/pc.24466 , , , , , :
Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts
In: Journal of Ceramic Science and Technology 08 (2017), p. 227-286
ISSN: 2190-9385
DOI: 10.4416/JCST2017-00009 , , , , , :
Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
Rapid Tech 2017 (Erfurt, 20th June 2017 - 22nd June 2017)
In: Proceedings of Rapid Tech 2017 2017 , , , , :
Selective laser sintering of polymer blends: Bulk properties and process behavior
In: Polymer Testing 64 (2017), p. 136-144
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.09.039 , , , :
Forming of thermoplastic matrix composites with gas pressure - the influence of blank holder and sheet temperature on the forming pressure and drawing ratio
In: International Polymer Processing 32 (2017), p. 194-202
ISSN: 0930-777X
DOI: 10.3139/217.3298 , :
Einfluss der druckabhängigen Viskosität auf die Spritzgusssimulation kurzfaserverstärkter Thermoplaste
Technomer 2017 (Chemnitz, 10th November 2017 - 10th November 2017) , :
Reduction of the heat capacity in low-temperature adsorption chillers using thermally conductive polymers as heat exchangers material
In: Energy Conversion and Management 145 (2017), p. 378-385
ISSN: 0196-8904
DOI: 10.1016/j.enconman.2017.05.011 , , , :
Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion
In: Composites Part B-Engineering 117 (2017), p. 20-25
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2017.02.042 , :
Adhesion promoter for unequal pairs
In: Kunststoffe International 107 (2017), p. 80-83
ISSN: 1862-4243 , , :
Vermittler für ungleiche Paare
In: Kunststoffe International (2017), p. 199-203
ISSN: 1862-4243 , , :
Department Maschinenbau - Forschung. Lehre. Transfer / Department of Mechanical Engineering – Research. Education. Transfer
(2017)
URL: https://www.department.mb.tf.fau.de/files/2017/03/MB_Departmentbroschuere_2017.pdf
(anderer) , :
Effect of the variation of the gating system on the magnetic properties of injection molded pole-oriented rings
In: Journal of Polymer Engineering 37 (2017), p. 537-546
ISSN: 0334-6447
DOI: 10.1515/polyeng-2016-0306 , :
Variation of the Pole Length in Pole-Oriented Bonded Rings
In: Journal of Polymers 2017 (2017), p. 11
ISSN: 2356-7570
DOI: 10.1155/2017/8241859 , :
Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen
5. Industriekolloquium des SFB 814 (Nürnberg, 12th December 2017 - 12th December 2017)
In: 5. Industriekolloquium des SFB 814 2017 , , , :
Influence of the Mold Temperature on the Material Properties and the Vibration Welding Process of Cross-Linked Polyamide 66
In: Polymer Engineering and Science (2017)
ISSN: 0032-3888
DOI: 10.1002/pen , , :
Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process
In: Rapid Prototyping Journal 23 (2017), p. 1099-1106
ISSN: 1355-2546
DOI: 10.1108/RPJ-04-2016-0060 , , :
Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy
In: Journal of Polymer Engineering 37 (2017), p. 411-420
ISSN: 0334-6447
DOI: 10.1515/polyeng-2016-0175 , :
Influence of Particle Size in Multi-layer Rotational Molding with a Multiphase Interlayer to generate Mechanical Adhesion
SPE Antec 2017 (Anaheim, 8th May 2017 - 10th May 2017)
In: SPE Proceedings Antec 2017 , :
Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht
In: Zeitschrift Kunststofftechnik 13 (2017), p. 1-31
ISSN: 1864-2217
DOI: 10.3139/O999.01012017 , :
Optimization of adhesion in multi-layer rotational molded parts by including a multi-phase interlayer
In: Zeitschrift Kunststofftechnik 2017 (2017), p. 1-31
ISSN: 1864-2217
DOI: 10.3139/O999.01012017 , :
Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics
In: Zeitschrift Kunststofftechnik 13 (2017), p. 212-232
ISSN: 1864-2217
DOI: 10.3139/O999.01042017 , , :
Layer-dependent characterization of wear behaviour on variothermal injection moulded micro parts using pin on disc measurements
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 23 (2017), p. 2807-2814
ISSN: 0946-7076
DOI: 10.1007/s00542-016-3051-8 , , :
Failure Criterion for SLS Additive Manufactured Parts
SPE Antec (Anaheim, 8th May 2017 - 10th May 2017)
In: SPE Proceedings Antec 2017 , , , , :
Understanding flame-retardant grades better
In: Kunststoffe International 107 (2017), p. 84-87
ISSN: 1862-4243 , :
A method for controlling the mold filling volume for BMC injection molding
75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA, 8th May 2017 - 10th May 2017)
In: Annual Technical Conference - ANTEC, Conference Proceedings 2017 , , , :
The mechanical and optical properties of injection-moulded PMMA, filled with glass particles of a matching refractive index
In: Polymers and Polymer Composites 25 (2017), p. 453-462
ISSN: 1478-2391 , :
Joining of Incompatible Polymer Combinations by Form Fit Using the Vibration Welding Process
In: International Journal of Polymer Science 2017 (2017), p. 8
ISSN: 1687-9422
DOI: 10.1155/2017/6809469 , , , :
Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents
In: Journal of Materials Processing Technology 246 (2017), p. 136-143
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2017.03.011 , , , , :
Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts
In: Journal of Polymer Engineering (2017)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0227 , , , , :
Investigating the in-plane mechanical behavior of single-ply quasi-unidirectional glass fiber/polypropylene composites
In: Journal of Polymer Engineering 37 (2017), p. 401-409
ISSN: 0334-6447
DOI: 10.1515/polyeng-2016-0247 , , :
Characterization of nonlinear response in quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
In: Polymer Testing 63 (2017), p. 521-529
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.09.019 , , :
The effect of hBN on the flame retardancy and thermal stability of P-N flame retardant PA6
In: Journal of Macromolecular Science Part A-Pure and Applied Chemistry (2017)
ISSN: 1060-1325
DOI: 10.1080/10601325.2017.1387484 , , , , :
2016
Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
In: 12th International Congress Molded Interconnect Devices, 2016, p. 62--67 , , , :
Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
12th International Congress Molded Interconnect Devices (Würzburg, 28th September 2016 - 29th September 2016)
In: 12th International Congress Molded Interconnect Devices (MID): Scientific Proceedings 2016
DOI: 10.1109/ICMID.2016.7738930 , , , :
Eliminating weld-seam weakness
In: Kunststoffe International 106 (2016), p. 52-55
ISSN: 1862-4243 , , :
Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts
In: Journal of Central South University 23 (2016), p. 2536-2541
ISSN: 2227-5223
DOI: 10.1007/s11771-016-3314-7 , , , :
Affecting processing and properties of injection moulded thin-wall parts using dynamic tempered rapid tooling moulds
In: Zeitschrift Kunststofftechnik 2016 (2016), p. 1-30
ISSN: 1864-2217 , , :
Prozess- und Eigenschaftsbeeinflussung dünnwandiger Spritzgießteile mittels dynamisch temperierten Rapid Tooling Spritzgießwerkzeugen
In: Zeitschrift Kunststofftechnik 12 (2016), p. 1-30
ISSN: 1864-2217 , , :
Polymer films for laser-structured circuit carriers
12th International Congress on Molded Interconnect Devices, MID 2016
DOI: 10.1109/ICMID.2016.7738919 , :
Effect of fillers on the metallization of laserstructured polymer parts
In: Journal of Polymer Engineering 37 (2016)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2016-0055 , , :
Crystallization and Mechanical Properties of Polypropylene under Processing-Relevant Cooling Conditions with respect to Isothermal Holding Time
In: International Journal of Polymer Science 2016 (2016), p. 11
ISSN: 1687-9422
DOI: 10.1155/2016/5450708 , :
Einfluss der Bauteildimensionen auf die Strukturausbildung und die Gebrauchseigenschaften beim Mikrospritzgießen von Polyamid 66
Fachtagung Polyamide 2016 (Würzburg, 20th April 2016 - 20th April 2016) , , :
Novel process enables more uniform wall thickness in formed composites
In: SPE Plastics Research Online (2016), p. 2
DOI: 10.2417/spepro.005866 , :
Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion
In: Macromolecular Materials and Engineering 301 (2016), p. 1482-1493
ISSN: 1439-2054
DOI: 10.1002/mame.201600259 , , :
Untersuchungen zum Mikrothermoformen von Polycarbonat-Folien und zu dessen Integration in den Spritzgießprozess
In: Zeitschrift Kunststofftechnik 12 (2016), p. 356-381
ISSN: 1864-2217 , :
Einflussfaktoren auf die Herstellung kunststoffgebundener multipolarer Magnetringe
5. Ilmenauer Magnettag (Ilmenau, 8th June 2016 - 8th June 2016) , :
Influences on the magnetic properties of injection molded multipolar rings
In: International Polymer Processing 31 (2016), p. 356-363
ISSN: 0930-777X
DOI: 10.3139/217.3211 , :
Kunststoffgebundene Dauermagnete
VDI-Fachkonferenz "Kunststoffe in der Mechatronik & Polytronik" (Düsseldorf, 6th December 2016 - 6th December 2016) , :
Kunststoffgebundene Dauermagnete - Stand, Anwendung und Perspektiven
2. Fraunhofer Fachtagung "Magnetwerkstoffe und seltene Erden" (Hanau, 30th June 2016 - 30th June 2016) , :
Influences of the variation of process parameters on the pole length of multipolar bonded magnets
74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016 , , :
Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties
iCAT 2016 (Nürnberg, 29th November 2016 - 30th November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016 , , , :
Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering
In: Physics Procedia 83 (2016), p. 981-990
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.103 , , , :
Detecting surface roughness on SLS parts with various measuring techniques
In: Polymer Testing 53 (2016), p. 217–226
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2016.05.022 , , , , , , :
Infrared welding of cross-linkable polyamide 66
In: eXPRESS Polymer Letters (2016), p. 849-859
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2016.79 , :
Post-crosslinking behavior of radiation crosslinked polyamide 66 during vibration welding
In: Polymer Engineering and Science 56 (2016), p. 735-742
ISSN: 0032-3888
DOI: 10.1002/pen.24300 , , :
Flame retarding mechanism of Polyamide 6 with phosphorus-nitrogen flame retardant and DOPO derivatives
In: Journal of Applied Polymer Science 133 (2016), p. 1-10
ISSN: 0021-8995
DOI: 10.1002/app.42932 , , , , , , :
Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding
In: Journal of Polymers 2016 (2016), p. 11
ISSN: 2356-7570
DOI: 10.1155/2016/5768453 , :
Multi-layer rotational molding of pe-pa utilizing a mulitphase interlayer to generate mechanical adhesion
74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016 (Indianapolis)
In: SPE Proceedings ANTEC 2016 , :
Influence of pressure on end corrections in capillary rheometry
In: Rheologica Acta 55 (2016), p. 823-832
ISSN: 0035-4511
DOI: 10.1007/s00397-016-0958-z , :
Micro assembly injection moulding with variothermal mould tempering
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 22 (2016), p. 1-9
ISSN: 0946-7076
DOI: 10.1007/s00542-016-2820-8 , :
Development of a biofabrication process for the manufacture of vessel like structures
Annual Conference of the German Society for Biomaterials 2016 (Aachen, 29th September 2016 - 1st October 2016)
In: BioNanoMaterials (ed.): Band 17, Berlin/Boston: 2016
DOI: 10.1515/bnm-2016-1001. , , , , , :
Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering
26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 8th August 2016 - 10th August 2016) , , , , , , , :
Optimized polybutylene terephthalate powders for selective laser beam melting
In: Chemical Engineering Science 156 (2016), p. 1-10
ISSN: 0009-2509
DOI: 10.1016/j.ces.2016.09.009 , , , , , , , :
A novel process for production of spherical PBT powders and their processing behavior during laser beam melting
31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea, 7th June 2015 - 11th June 2015)
In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016
DOI: 10.1063/1.4942343 , , , , , , , , :
Mechanical properties of radiation cross linked polyamide 12 after vacuum thermofoming
In: Production Engineering 10 (2016), p. 119-128
ISSN: 0944-6524 , , :
A fiber optic temperature sensor based on the combination of epoxy and glass particles with different thermo-optic coefficients
In: Photonic Sensors 6 (2016), p. 295-302
ISSN: 1674-9251
DOI: 10.1007/s13320-016-0328-6 , :
A Fiber Optic Temperature Sensor Based on the Combination of Two Materials with Different Thermo-Optic Coefficients
In: IEEE Sensors Journal 16 (2016), p. 688 - 692
ISSN: 1530-437X
DOI: 10.1109/JSEN.2015.2488979 , :
Nano Filler Materials for Transparent Polymer Composites: Influences on the Properties and on the Transparency --- A review
In: Polymer Composites (2016)
ISSN: 0272-8397 , :
Analysis of time dependent thermal properties for high rates in selective laser sintering
iCAT 2016 (Nürnberg, 29th November 2016 - 30th November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016 , , , :
Aging Behavior of Polyamide 12 Interrelation between Bulk Characteristics and Part Properties
27th Solid Freeform Fabrication Symposium (Austin, Tx, 8th August 2016 - 10th August 2016)
In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2016 , :
Selective Laser Sintering of Filled Polymer Systems: Bulk and Laser Beam Interaction
In: Physics Procedia 83 (2016), p. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104. , , :
Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction
In: Physics Procedia 83 (2016), p. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104 , , :
Tensile behavior of quasi-unidirectional glass fiber/polypropylene composites at room and elevated temperatures
In: Polymer Testing 54 (2016), p. 126-133
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2016.07.003 , , :
2015
Einfluss des Pulverauftragsprozesses auf den selektiven Strahlschmelzprozess thermoplastischer Kunststoffe
RapidTech 2015 (Erfurt, 10th June 2015 - 11th June 2015)
In: Tagungsband / Digital Proceedings RapidTech 2015 2015 , , :
Interaction between Time Dependent Exposure Strategies and Part Positioning within Selective Laser Melting Process of Plastics
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015), p. 13-19
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i1.4286 , , :
Selective Laser Melting of Polymer Powder - Part Mechanics as Function of Exposure Speed
In: Physics Procedia 78 (2015), p. 328-336
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2015.11.047 , , :
Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing
7th World Congress on Particle Technology (WCPT7) (Beijing)
In: New Paradigm of Particle Science and Technology Proceedings of The 7th World Congress on Particle Technology 2015 , , :
Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing
In: Procedia Engineering 102 (2015), p. 1908-1917
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.01.331 , , :
Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers
PPS-30 (Cleveland)
In: AIP Conference Proceedings 2015
DOI: 10.1063/1.4918513 , , :
Long-term Properties of Laser Sintered Parts of Polyamide 12 - Influence of Storage Time and Temperature on the Aging Behavior
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015), p. 20-27
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i1.4289 , , , , , :
Influence of short fibre reinforcement on properties of injection moulded micro parts in dependence of fibre content and part dimensions
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 21 (2015), p. 1-9
ISSN: 0946-7076
DOI: 10.1007/s00542-015-2752-8 , , :
Polymer powder production for laser melting through immiscible blends
In: Procedia Engineering 102 (2015), p. 1918-1925
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.01.332 , , , :
Handbuch Kunststoff-Metall-Hybridtechnik
Erlangen: Lehrstuhl für Kunststofftechnik, 2015
ISBN: 978-3-931864-66-8 , , , , , , , , , , , , , , , , , , , , , , , , :
Modelling of the Aging Behavior of Polyamide 12 Powder during Laser Melting Process
30th Annual Meeting of the Polymer Processing Society (Cleveland, USA)
In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2015
DOI: 10.1063/1.4918514 , , :
Selektives Strahlschmelzen von Polymer-Blends: Prozess- und Werkstoffanforderungen
RapidTech 2015 (Erfurt)
In: Tagungsband / Digital Proceedings RapidTech 2015 2015 , , :
Beeinflussung von tribologischen Eigenschaften durch dynamische Temperierung
In: Zeitschrift Kunststofftechnik 11 (2015), p. 1-26
ISSN: 1864-2217 , :
Influencing the tribological properties by dynamic tempering
In: Zeitschrift Kunststofftechnik 2015 (2015), p. 44-68
ISSN: 1864-2217 , :
Influence of metal inserts with microformed edges on subsequent injection assembly moulding for media tight electronic systems
4th International Conference on New Forming Technology, ICNFT 2015
DOI: 10.1051/matecconf/20152109013 , , , :
Embossing of Metal Inserts for Subsequent Assembly Injection Moulding of Media Tight
In: Key Engineering Materials 639 (2015), p. 99-106
ISSN: 1013-9826 , , , , :
Embossing of metal inserts for subsequent assembly injection moulding of media tight electronic systems
In: Key Engineering Materials 639 (2015), p. 99-106
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.99 , , , , :
Influencing factors on field inversion in HVDC cables
Jicable'15 - 9th International Conference on Insulated Power Cables (Paris, 21st June 2015 - 25th June 2015)
In: Achter Workshop Optische Technologien - LED Beleuchtung - Technik und Anwendung, Garbsen: 2015 , , , :
In-line layer wise measurements for selective laser sintering process
XXI IMEKO World Congress “Measurement in Research and Industry” (Prague, Czech Republic, 30th August 2015 - 4th September 2015) , , , :
Studie zur Umsetzbarkeit der Laserdirektstrukturierung von lasergesinterten Bauteilen
RapidTech 2015 (Erfurt, 10th June 2015 - 11th June 2015)
In: Tagungsband / Digital Proceedings RapidTech 2015 2015 , :
Possibilities and potential of plastic gear applications
International VDI Conference on High Performance Plastic Gears (München, 5th October 2015 - 5th October 2015) , :
Wall thickness distribution of continuous glass fiber reinforced polyamide 6 composite parts formed by gas pressure
ANTEC 2015 (Cleveland, USA)
In: SPE Proceedings ANTEC 2015 , :
Heat transfer coefficient in injection molding of polymers
In: International Polymer Processing 30 (2015), p. 434-441
ISSN: 0930-777X
DOI: 10.3139/217.3084 , :
Measuring mechanical stresses on inserts during injection molding
In: Advances in Mechanical Engineering 7 (2015), p. 1-6
ISSN: 1687-8132
DOI: 10.1177/1687814015584479 , :
Temperature-dependent coefficient of thermal expansion (CTE) of injection molded, short-glass-fiber-reinforced polymers
In: Polymer Engineering and Science 55 (2015), p. 2661-2668
ISSN: 1548-2634
DOI: 10.1002/pen.24159 , :
The effect of temperature and pressure on microthermoforming thermoplastic films integrated in the injection moulding process
In: Journal of Polymer Engineering (2015), p. 1-9
ISSN: 0334-6447
DOI: 10.1515/polyeng-2015-0232 :
Microthermoforming Integrated in the Injection Molding Process for Fabrication of Film-Based Microstructured Parts
In: International Polymer Processing 30 (2015), p. 381-389
ISSN: 0930-777X , :
Mikrothermoformen thermoplastischer Folien im Spritzgießprozess
7. Kolloquium Mikroproduktion (Aachen, 16th November 2015 - 17th November 2015)
In: 7. Kolloquium Mikroproduktion, Aachen: 2015 , :
Fundamental investigation of laser beam melting of polymers for additive manufacture (vol 26, 042003, 2014)
In: Journal of Laser Applications 27 (2015)
ISSN: 1042-346X
DOI: 10.2351/1.4897013 , , , , , , :
Rapid-Manufacturing-Process for Elastomeric Components
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015)
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i2.4593 , , :
Research on the Influence of Geometry and Positioning on Laser Sintered Parts
In: Applied Mechanics and Materials 805 (2015), p. 105-114
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.805.105 , , :
Vibrationsschweissen von strahlenvernetzten Polyamid 66 mit PA6T/6I GF 50
In: Joining Plastics - Fügen von Kunststoffen 9 (2015), p. 178-185
ISSN: 1864-3450 , :
Influence of Radiation Cross-Linking of Polyamide 66 on the Characteristics of the Vibration Welding Process
In: Polymer Engineering and Science 55 (2015), p. 1-7
ISSN: 0032-3888
DOI: 10.1002/pen.24139 , , :
Influence of Processing Parameters in Reaction Injection Foam Molding on for Multi-Layer Parts on Foam Structure and Mechanical Properties
In: Applied Mechanics and Materials 805 (2015), p. 131-138
ISSN: 1660-9336 , :
The effect of pressure variations on the formation of gas inclusions in the rotational molding process
In: Journal of Polymer Engineering 35 (2015), p. 481-491
ISSN: 0334-6447
DOI: 10.1515/polyeng-2014-0145 , :
Computertomographie in der Kunststofftechnik
TECHNOMER 2015 (Chemnitz)
In: Fachbeiträge Technomer 2015 2015 , , :
Replication quality of micro structures in injection moulded thin wall parts using rapid tooling moulds
In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems (2015), p. 1-12
ISSN: 0946-7076
DOI: 10.1007/s00542-015-2415-9 , , :
Influence of Radiation Cross-Linking on Fiber Orientation in Vibration Welds of Polyamide 66
In: Polymer Composites (2015), p. 1-7
ISSN: 0272-8397
DOI: 10.1002/pc.23607 , , :
Determination of Optimal Processing Conditions for the Production of Polyamide 11 Parts using the Laser Sintering Process
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015), p. 5-12
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i1.4249 , , , :
Modelling haze and transmission of transparent filled systems in dependence of filler surface area, refractive index difference and wavelength
ANTEC 2015 (Orlando, USA)
In: SPE Proceedings ANTEC 2015 , :
Aging behavior of polyamide 12 during selective laser melting process - influence on mechanical properties
ANTEC 2015 (Orlando, USA, 23rd March 2015 - 25th March 2015)
In: Society of Plastics Engineers (ed.): SPE Proceedings ANTEC 2015 , :
Sintering Study of Polyamide 12 Particles for Selective Laser Melting
In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015), p. 28-33
ISSN: 2197-8581
DOI: 10.3991/ijes.v3i1.4290 , , , :
Untersuchung des Schmelz- und Sinterprozesses von Polyamid 12 beim selektiven Strahlschmelzen
RapidTech 2015 (Erfurt)
In: Tagungsband / Digital Proceedings RapidTech 2015 2015 , , , :
2014
Selektives Strahlschmelzen von Kunststoffen - Ganzheitliche Prozessbetrachtung zur gezielten Optimierung von Bauteileigenschaften
3. Industriekolloquium des SFB 814 (Nürnberg)
In: 3. Industriekolloquium des SFB 814, Erlangen: 2014 , , :
Derivation of Heating Rate Dependent Exposure Strategies for the Selective Laser Melting of Thermoplastic Polymers
30th Annual Meeting of the Polymer Processing Society (Cleveland, USA)
In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2014 , , :
Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder
In: Physics Procedia 56 (2014), p. 184-192
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.162 , , :
Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting
5th International Conference on Additive Technologies - iCAT2014 (Vienna, 8th September 2014 - 11th September 2014)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014
DOI: 10.1016/j.phpro.2014.08.160 , , :
Resulting melt-pool-shape during selective beam melting of thermoplastics as function of energy input parameters
Fraunhofer Direct Digital Conference 2014 (Berlin)
In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference, Aachen: 2014 , , :
Hochleistungsfaserverbundbauteile - Innovativer Verfahrensbaukasten
In: emobility tec (2014), p. 8
ISSN: 2193-892X , , , :
Long-term properties of laser sintered parts of polyamide 12 - Influence of storage time and temperature on the ageing behaviour
5th International Conference on Additive Technologies - iCAT2014 (Vienna)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014 , , , , , :
Neuartiges Werkzeug- und Temperierkonzept für tribologisch optimierte Mikroteile
In: Konstruktion 1/2 (2014), p. 61-66
ISSN: 0720-5953 , , , :
Novel mold and tempering concept for tribological optimized micropartsnovel mold and tempering concept for tribological optimized microparts Neuartiges Werkzeug- und Temperierkonzept fur tribologisch optimierte Mikroteile
In: Konstruktion 1/2-2014 (2014), p. 61-66
ISSN: 0720-5953
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902134422&origin=inward , , , :
Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66
In: International Journal of Polymer Science 2014 (2014), Article No.: 718926
ISSN: 1687-9422
DOI: 10.1155/2014/718926 , :
Leichtfließend und orientierungsarm
In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 6 (2014), p. 42-45
ISSN: 0032-1338 , , :
Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods
In: Advances in Materials Science and Engineering (2014), p. 8
ISSN: 1687-8434
DOI: 10.1155/2014/769206 , , :
Influence of Energy Input on Degradation Behavior of Polyamide 12 during selective Laser Melting Process
Fraunhofer Direct Digital Conference 2014 (Berlin)
In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference, Aachen: 2014 , , :
Selective laser melting of polyamide 12: A holistic approach for the modeling of the aging behavior
5th International Conference on Additive Technologies - iCAT2014 (Vienna)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014 , , :
Reliability of LDS Conductor Paths - Influencing Factors and Characterization Methods
Molded Interconnected Devices (Fürth, 24th September 2014)
In: Franke J, Kuhn T, Birkicht A, Pojtinger A (ed.): 11th International Congress Molded Interconnect Devices, Nürnberg: 2014 , , , , , :
Auslegungsstrategie für Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe
VDI - Kunststoffe in Optischen Systemen (Baden-Baden, 1st October 2014) , , :
The Influence of Inner Component and Topographical Properties on Tribological Parameters of Injection-Moulded Microparts
In: Advances in Mechanical Engineering 10 (2014), p. 10
ISSN: 1687-8132
DOI: 10.1155/2014/321674 , :
The influence of proccessing temperature on morphological and tribological properties of injection-moulded micro parts
In: Advances in Mechanical Engineering (2014)
ISSN: 1687-8132
DOI: 10.1155/2014/218761 , , , , :
Model of a Measurement Artifact for Additive Manufacturing
5th International Conference on Additive Technologies - iCAT2014 (Vienna)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014 , , , :
The Influence of Moisture and Laminate Setup on the De-Consolidation Behavior of PA6/GF Thermoplastic Matrix Composites
In: International Polymer Processing 5 (2014), p. 660-668
ISSN: 0930-777X , :
Twin-O-Sheet: producing functionalized hollow bodies in a shorter process chain
In: JEC Composites Magazine 05 (2014), p. 51-53
ISSN: 1639-965X , :
Influences of the design and production on the characteristic properties of multipolar bonded magnets
2014 4th International Electric Drives Production Conference, EDPC 2014
DOI: 10.1109/EDPC.2014.6984391 , :
Fundamental investigation of laser beam melting of polymers for additive manufacture
In: Journal of Laser Applications 26 (2014)
ISSN: 1042-346X
DOI: 10.2351/1.4892848 , , , , , , :
Großvolumige Organoblech-Hohlkörperstrukturen in einem Schuss
In: Lightweight Design 7 (2014), p. 44-49
ISSN: 1865-4819 , , , :
Dimension-dependent long-term properties of injection molded micro parts
ANTEC 2014 (Las Vegas, USA)
In: SPE ANTEC 2014 2014 , :
Friction and wear of thermoplastic polymers with respect to spur-gear applications
1st International Conference on Polymer Tribology (Bled, Slovenia)
In: PolyTrib 2014 2014 , :
Material Characterization of Strontium Ferrite Powders for Producing Sintered Magnets by Ceramic Injection Molding
In: Advances in Materials Science and Engineering 2014 (2014), p. 8
ISSN: 1687-8434 , :
One-Shot Production of Sintered Magnets
In: Kunststoffe International 3 (2014), p. 62-65
ISSN: 1862-4243 , :
Sintermagnete aus einem Guss
In: Kunststoffe 3 (2014), p. 100-103
ISSN: 0023-5563 , :
Wenn Pulver ein Lächeln zaubert
In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen (2014), p. 78-80
ISSN: 0032-1338 , :
A new process chain for joining sheet metal to fibre composite sheets
Material Forming ESAFORM 2014 (Finnland, 7th May 2014 - 9th May 2014)
In: Key Engineering Materials (Volumes 611 - 612) 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.1468 , , , , , , , , :
A new process chain for joining sheet metal to fibre composite sheets
In: Key Engineering Materials 611-612 (2014), p. 1468-1475
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.1468 , , , , , , , , , :
Vibrationsschweißen wärmeleitender Thermoplaste
In: Joining Plastics - Fügen von Kunststoffen 8 (2014), p. 119-127
ISSN: 1864-3450 , , :
Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12
In: Computational Materials Science 93 (2014), p. 239-248
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2014.06.046 , , , , :
Thermoforming radiation crosslinked polyamide - effects of degree of cross linking and thermoforming processing conditions
ANTEC 2014 (Las Vegas, USA)
In: SPE ANTEC 2014 2014 , :
Investigating the full-faced joining of polymer-metal hybrid structures
ANTEC 2014 (Las Vegas, USA)
In: SPE ANTEC 2014 2014 , :
Influence of Process Parameters on the Part Properties of Laser Sintered Polyamide 11
5th International Conference on Additive Technologies - iCAT2014 (Vienna)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014 , , , :
Wavelength Dependent Haze of Transparent Glass-Particle Filled Poly(Methyl Methacrylate) Composites
In: ISRN Optics (2014), Article No.: 802369
ISSN: 2090-7826
DOI: 10.1155/2014/802369 , :
Influence of degradation behavior of polyamid 12 powders in laser sintering process on produced parts
29th Annual Meeting of the Polymer Processing Society (Nürnberg)
In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2014
DOI: 10.1063/1.4873873 , , :
Sintering Study of Polyamide 12 Particles for Selective Laser Melting
5th International Conference on Additive Technologies - iCAT2014 (Vienna)
In: Proceedings 5th International Conference on Additive Technologies - iCAT2014, Ljubljana: 2014 , , , :
2013
Effects of the powder bulk density on the porosity of laser molten thermoplastic parts
29th Annual Meeting of the Polymer Processing Society (Nürnberg)
In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 , , :
Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften
2. Industriekolloquium des SFB 814 (Nürnberg)
In: 2. Industriekolloquium des SFB 814 2013 , , , , , :
Einfluss der Scangeschwindigkeit auf die Bauteileigenschaften pulver- und strahlbasierter Verfahren
In: RTejournal - Forum für Rapid Technologie 7 (2013), p. -
ISSN: 1614-0923 , , :
Kunststoffe in der Elektronikproduktion
Laser in der Elektronikproduktion & Feinwerktechnik (LEF) (Fürth)
In: LEF 2013 2013 , :
Direkte Umformung von Organoblechen durch Gasdruck
In: Kunststoffe (2013), p. 70-74
ISSN: 0023-5563 , , :
Auswirkungen differierender Füllgrade auf die Urform- und Sintereigentschaften im Keramikspritzguss
In: Keramische Zeitschrift (2013), p. 36-40
ISSN: 0023-0561 , :
Influence of different filling degrees on the original shape and sintering behavior in ceramic injection moulding
In: Keramische Zeitschrift 65 (2013), p. 36-40
ISSN: 0023-0561
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84880224707&origin=inward , :
Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck
Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck (Fürth)
In: Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck 2013 , :
Direct Forming of Organosheets by Gas Pressure
In: Kunststoffe International 12 (2013), p. 54-57
ISSN: 1862-4243 , , :
Calculation of the anisotropic, temperature-dependent thermal expansion coefficient (TEC) of parts made from short-fiber-reinforced polymers
71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH)
In: SPE Proceedings ANTEC 2013 2013
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903525119&origin=inward , :
Konstruktiv arbeiten mit der anisotropen thermischen Dehnung von verstärkten Kunststoffen
In: Konstruktion (2013), p. 83-87
ISSN: 0720-5953 , :
Dichtheit von Steckverbindern unter Temperaturbelastung
4th International Connectors Symposium (Lemgo)
In: Symposium Connectors GMM Fachtagung 2013 , , :
Improvement of the magnetic properties of injection molded polymer bonded magnets
2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg, 29th October 2013 - 30th October 2013)
DOI: 10.1109/EDPC.2013.6689718 , :
Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering
In: Advances in Mechanical Engineering (2013), Article No.: 407964
ISSN: 1687-8132
DOI: 10.1155/2013/407964 , :
Alterung bei Mikrospritzgießteilen - Einfluss variothermer Werkzeugtemperierung
In: GIT Labor-Fachzeitschrift (2013), p. 300-302
ISSN: 0016-3538 , :
Influence of manufacturing conditions on measurement of mechanical material properties on thermoplastic micro tensile bars
In: Polymer Testing 32 (2013), p. 432-437
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2012.12.006 , :
Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding
In: International Polymer Processing 28 (2013), p. 550-557
ISSN: 0930-777X
DOI: 10.3139/217.2804 , :
Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering
In: Thescientificworldjournal (2013)
ISSN: 1537-744X
DOI: 10.1155/2013/845916 , :
Long-Term Properties of Injection-Molded Micro-Parts: Influence of Part Dimensions and Cooling Conditions on Aging Behavior
In: Macromolecular Materials and Engineering 297 (2013), p. 994-1004
ISSN: 1438-7492 , , :
Mechanische Kennwertermittlung für Mikrobauteile an spritzgegossenen Mikro-Zugprüfkörpern
In: Zeitschrift Kunststofftechnik 9 (2013), p. 74-99
ISSN: 1864-2217 , , :
Measurement of mechanical material properties for micro parts on injection moulded micro tensile bars
In: Zeitschrift Kunststofftechnik 9 (2013), p. 74-99
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84873619715&origin=inward , , , :
Mischmaterialverbindungen: Kleben mit Vibrationstechnik
In: Lightweight Design 6 (2013), p. 56-61
ISSN: 1865-4819 , :
Formschlüssiges Fügen von Metallen mit Faserverbundkunststoffen mittels Vibrationsschweißtechnik
Große Schweißtechnische Tagung (Essen)
In: DVS Berichte Band 296 zur Großen Schweißtechnischen Tagung 2013 , , :
Temperatur and Sliding Distance Dependency of Assembly molded Friction Clutches
71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH)
In: SPE Proceedings ANTEC 2013 2013
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903541123&origin=inward , :
Ceramic injection molding - Material analysis, modeling and injection molding simulation
29th Annual Meeting of the Polymer Processing Society (Nürnberg)
In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 , :
Aufbereitung im Keramikspritzguss
23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
In: Technomer 2013 2013 , , :
Angepasste Füllstoffsysteme für das Spritzgießen von Kunststoffbauteilen mit erhöhter Wärmeleitfähigkeit
23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
In: Technomer 2013 2013 , :
Entwicklung neuartiger Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe
SMT 2013 - MID Forum (Nürnberg, 16th April 2014 - 16th April 2014) , , :
Multiaxial elongational behaviour of radiation cross linked polyamide melts
In: Zeitschrift Kunststofftechnik (2013), p. 295-319
ISSN: 1864-2217 , :
Multiaxiales Dehnverhalten strahlenvernetzter Polyamidschmelzen
In: Zeitschrift Kunststofftechnik 9 (2013), p. 296-319
ISSN: 1864-2217 , :
Analyse des stoffschlüssigen Verbunds an Kunststoff-Metall-Hybridbauteilen
13. Fachtagung - FTK - Fertigungstechnologie Kleben (Stuttgart)
In: Fertigungstechnologie Kleben 2013 , :
Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen
2. Industriekolloquium des SFB 814 (Nürnberg)
In: 2. Industriekolloquium des SFB 814 2013 , , :
Characterization of polymer materials and powders for selective laser melting
29th Annual Meeting of the Polymer Processing Society (Nürnberg)
In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 , , :
Langzeitverhalten von Polyamid 12 Pulver zur Verarbeitung mittels selektivem Laserstrahlschmelzen
Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
In: Technomer 2013 2013 , , :
Materialalterung beim Rapid Manufacturing - Alterungsverhalten von Kunststoffpulvern beim selektiven Strahlschmelzen
In: GIT Labor-Fachzeitschrift (2013), p. 372-375
ISSN: 0016-3538 , , , :
2012
Effects on the density distribution of SLS-parts
Laser Assisted Net Shape Engineering 7 (Fürth)
In: Physics Procedia 39 2012
DOI: 10.1016/j.phpro.2012.10.066 , , :
Influence of powder coating on part density as a function of coating parameters
4th International Conference on Additive Technologies (Maribor)
In: 4th International Conference on Additive Technologies 2012 , , :
Modeling of Transient Thermal Conditions During Selective Laser Melting
1st International Conference on Thermo-Mechanically Graded Materials (Kassel)
In: 1st International Conference on Thermo-Mechanically Graded Materials 2012 , , :
Influence of the filler premagnetization in hot runner on its orientability during injection molding of multi polar SmCo-magnets
22nd International Conference and Exhibit: Vital Technologies for Business Success in Changing Global Market, MOLDING 2012 (Miami, FL)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902380484∨igin=inward :
Plastic-metal hybrid technology: Materially coherently bonded in injection molding
In: Adhaesion Kleben und Dichten (2012), p. 42-46
ISSN: 0943-1454
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84865747942∨igin=inward :
Neue Prozesstechnologien für die Mikrofertigung
In: Mikroproduktion 10 (2012), p. 50-57
ISSN: 1614-4538 , , , , , , , , , , :
Suitability of PLA/TCP for Fused Deposition Modeling
In: Rapid Prototyping Journal 18 (2012), p. -
ISSN: 1355-2546
DOI: 10.1108/13552541211272045 , , :
Analysis and Comparative Assessment of Different Process Technologies for Manufacturing Polymer Micro-Elements
In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 2 (2012), p. 347-362
ISSN: 0921-5107 , , , , , , , :
Innovative process technologies for manufacturing thermoplastic micro parts - Analysis and comparative assessment
In: Zeitschrift Kunststofftechnik 8 (2012), p. 439-467
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870001732&origin=inward , , , , , , , :
Innovative Prozesstechnologien für die Herstellung thermoplastischer Mikrobauteile - Analyse und vergleichende Bewertung
In: Zeitschrift Kunststofftechnik 8 (2012), p. 439-467
ISSN: 1864-2217 , , , , , , , :
A contribution for qualitatively modeling of friction and wear behavior of thermoplastics
ANTEC 2012 (Orlando, 2nd April 2012 - 4th April 2012)
In: SPE Proceedings ANTEC 2012 2012 , , :
Degradation behaviour of PA 12 powders in laser sintering
iCAT 2012 - 4th International Conference on Additive Technologies (Maribor)
In: Proceedings of the 4th International Conference on Additive Technologies (ICAT 2012) 2012 , , :
Investigations on the degradation behaviour of PA 12 plastic powders - Influence of high temperatures on the moleculare weight
13th Annual International RAPDASA 2012 Conference (South Africa)
In: Proceedings of the 13th RAPDASA annual international Conference 2012 , , , :
Einfluss des Werkzeugwerkstoffs auf die Struktur und die Eigenschaften von Mikrobauteilen
3. Industriekolloquium der Forschergruppe 702 (Aachen)
In: 3. Industriekolloquium der Forschergruppe 702 2012 , , :
Einsatz der Computertomographie zur Material- und Prozesscharakterisierung im Keramikspritzguss
46. Meallographie-Tagung (Rostok)
In: 46. Meallographie-Tagung 2012 , :
Kunststoffe in Optischen Systemen
In: Kunststoffe 102 (2012), p. 20-24
ISSN: 0023-5563 , , :
Plastics in Optical Systems
In: Kunststoffe International (2012), p. 6-10
ISSN: 1862-4243 , , :
Trend report: Plastics in optical systems
In: Kunststoffe International 102 (2012), p. 6-10
ISSN: 1862-4243
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84868565566&origin=inward , , :
Einfluss der Prozessführung auf die Bauteileigenschaften bei der Druckverfestigung amorpher Thermoplaste
In: Zeitschrift Kunststofftechnik 8 (2012), p. 138-178
ISSN: 1864-2217 , , , , :
Spritzgießen von Mikrobauteilen durch Schmelzevorkompression
3. Industriekolloquium der Forschergruppe 702 (Achen)
In: 3. Industriekolloquium der Forschergruppe 702 2012 , , :
Thermal Conductive-Modified Polyamide Compounds for Manufacturing MID and Film Substrates
10. International Congress MID (Fürth)
In: 10. International Congress MID 2012 , , :
Mediendichte Umhausung spritzgegossener, räumlicher elektronischer Schaltungsträger im Montagespritzguss
In: PLUS - Produktion von Leiterplatten und Systemen (2012), p. 376-385 , , , :
Anforderungen und Randbedingungen für den Einsatz optischer Messsysteme zur In-Line-Prüfung additiv gefertigter Bauteile
Rapid.Tech 2012 (Erfurt)
In: RTejournal - Forum für Rapid Technologie 2012
URL: http://www.rtejournal.de/ausgabe9/3327/ , , , :
Incremental In-line Measurement Technique for Additive Manufacturing
Direct Digital Manufacturing Conference (DDMC) (Berlin)
In: Proceedings 2012 , , , :
Hybridtechnik in mechatronischen Systemen
Hybridica Forum (Müchen)
In: Hybridica Foum 2012 , :
Stress im Prozess - Belastung elektronischer Bauelemente im Montage-Spritzgießprozess
In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 63 (2012), p. 62-66
ISSN: 0032-1338 , :
Assembly Molding for Resistant Media Tight Molded Interconnect Devices
15th Int. Conference Polymeric Materials (Halle)
In: 15th Int. Conference Polymeric Materials 2012 , , , :
Hochbelastbare Leichtbauteile aus der Spritzgießmaschine - Werkstoffe, Verfahren und Perspektiven
Mitteldeutscher Kunststofftag 2012 (Leipzig)
In: Mitteldeutscher Kunststofftag 2012 2012 , , :
Compression-Induced Solidification: A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses
In: ISRN Optics 2012 (2012), Article No.: 872816
ISSN: 2090-7826
DOI: 10.5402/2012/872816 , , , :
Investigations of the directional mechanical properties and reasons of fracture of Mask Sintered PA12-components
In: Zeitschrift Kunststofftechnik 8 (2012), p. 106-137
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84857846193&origin=inward , , :
Untersuchung der richtungsabhängigen mechanischen Eigenschaften und Bruchursachen maskengesinterter PA12-Bauteile
In: Zeitschrift Kunststofftechnik 8 (2012), p. 106-137
ISSN: 1864-2217 , , :
Herstellung von CFK-Bauteilen durch Direktimprägnierung mit Thermoplasten in der Spritzgießmaschine
In: Lightweight Design (2012), p. 56-61
ISSN: 1865-4819 , , , :
Eigenschaftsoptimierung von Mikrobauteilen - Spritzgießen mit variothermer Werkzeugtemperierung
In: Konstruktion 11 (2012), p. 11-13
ISSN: 0720-5953 , :
Orientierungsarm dank langsamer Abkühlung
In: Mikroproduktion (2012), p. 54-58
ISSN: 1614-4538 , :
Cross-linking in adhesives using vibration technology
In: Adhesion Adhesives & Sealants 1 (2012), p. 42-46
ISSN: 2192-2624 , :
Kleben mittels Vibrationstechnologie - schnell, selbstreinigend und qualitätssicher
In: Joining Plastics - Fügen von Kunststoffen 6 (2012), p. 38-43
ISSN: 1864-3450 , :
Assembly injection molded friction clutches as mechanical overload protection for mechatronic devices
2012 2nd International Electric Drives Production Conference, EDPC 2012 (Nürnberg)
In: Electric Drives Production Conference 2012
DOI: 10.1109/EDPC.2012.6425127 , :
Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern
In: Konstruktion (2012), p. 77-82
ISSN: 0720-5953 , , :
Multi component technology enhances capability of plastic gears
In: Konstruktion (2012), p. 77-82
ISSN: 0720-5953
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84897882446&origin=inward , , :
Ein energieeffizientes Verfahren für den Leichtbau
In: Kunststoffe (2012), p. -
ISSN: 0023-5563 , :
Process combinations as a key for producing lightweight and high-duty composite structures based on thermoplastic materials
15th European Conference on Composite Materials (Venedig, 24th June 2012 - 28th June 2012)
In: 15th European Conference on Composite Materials 2012 , :
Formgebung von thermoplastischen Faserverbundbauteilen durch Verfahrenskombination
VDI Wissensforum: Composites effizient verarbeiten (Bremen)
In: VDI Wissensforum: Composites effizient verarbeiten 2012 , , :
Tuning Elasticity of Open-Cell Solid Foams and Bone Scaffolds via Randomized Vertex Connectivity
In: Advanced Engineering Materials 14 (2012), p. 120-124
ISSN: 1438-1656
DOI: 10.1002/adem.201100145 , , , , , , , , :
Laser direct structuring of thermally conductive polymers
MID Kongress (Fürth)
In: MID Kongress 2012 , :
Wärmeleitende Kunststoffe für das thermische Management optoelektronischer Baugruppen
VDI-Fachkonferenz (Baden-Baden)
In: VDI-Fachkonferenz 2012 , :
Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme
VDI Wissensforum (Fürth)
In: VDI Wissensforum 2012 , :
Wärmemanagement mit hochgefüllten Kunststoffen
Erlanger-Bayreuther-Kunststofftage (Erlangen)
In: Erlanger-Bayreuther-Kunststofftage 2012 , , :
Laser direct structuring of thermally conductive polymers: An innovative thermal management approach
ANTEC 2012 (Orlando, 2nd April 2012 - 4th April 2012)
In: SPE Proceedings ANTEC 2012 2012 , , :
Wärmeleitende Kunststoffe in der Elektronik
OTTI-Fachforum (Regensburg)
In: OTTI-Fachforum 2012 , , , :
Heat conductive thermosets for the injection molding process
2nd International Electric Drives Production Conference (Nürnberg, 15th October 2012 - 18th October 2012)
In: EDPC 2012 - Proceedings 2012
DOI: 10.1109/EDPC.2012.6425136 , :
Elongational Rheology of Cross Linked Polymaide 12 and its Relevance for Vacuum Thermoforming
POLYCHAR 20 World Forum on Advanced Materials (Dubrovnik)
In: POLYCHAR 20 World Forum on Advanced Materials 2012 , :
The effects of radiation cross-linking and process parameters on the behavior of polyamide 12 in vacuum thermoforming
In: Polymer Engineering and Science 52 (2012), p. 884-892
ISSN: 0032-3888
DOI: 10.1002/pen.22155 , :
Radiation Cross Linking of Semi-Crystalline Thermoplastics – A Novel Approach in Modifing a Materials’s Thermoformability
8th European Thermoforming Conference (Venedig)
In: 8th European Thermoforming Conference 2012 , , :
Radiation Crosslinking of Semicrystalline Thermoplastics: A Novel Approach to Modifying a Material's Thermoformability
In: Plastics Engineering (2012), p. 14-22
ISSN: 0091-9578 , , :
Im Spritzguss stoffschlüssig verbunden
In: Adhaesion Kleben und Dichten (2012), p. 2-6
ISSN: 1619-1919 , :
Druckverfestigung: Übertragung der Grundlagen auf die Spritzgießvariante
VDI-Fachkonferenz (Baden-Baden)
In: VDI-Fachkonferenz 2012 , , :
Polymer Blends for Selective Laser Sintering: Material and Process Requirements
Laser Assisted Net Shape Engineering 7 (Fürth)
In: Physics Procedia 39 2012
DOI: 10.1016/j.phpro.2012.10.067 , , :
2011
- Menacher M., Drummer D.:
Joining of synthetic materials: Adhesive curing through vibration technology
In: Adhaesion Kleben und Dichten (2011), p. 42-46
ISSN: 0943-1454
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84855671677&origin=inward
Thermoplastische Faserverbundkunststoffe - Werkstoff | Verarbeitung | Simulation | Anwendung
Erlangen: 2011
ISBN: 978-3-931864-52-1 (ed.):
Kunststoffgebundene Dauermagnete für Aktor- und Sensoranwendungen
VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth)
In: Kunststoffe in der Mechatronik 2011 , :
Alternating Temperature Technology Controls Parts Properties
In: Kunststoffe International 101 (2011), p. 25-27
ISSN: 1862-4243 , , :
Process optimization: Alternating temperature technology controls parts properties
In: Kunststoffe International 101 (2011), p. 25-27
ISSN: 1862-4243
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955685823&origin=inward , , :
Wechseltemperierung steuert Bauteileigenschaften
In: Kunststoffe 101 (2011), p. 46-49
ISSN: 0023-5563 , , :
Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme - aus Sicht der Hochschule
VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth)
In: Kunststoffe in der Mechatronik 2011 , :
Wie das Spritzgießen den Verschleiß bei Zahnrädern reduziert
In: Maschinenmarkt 117 (2011), p. 36-39
ISSN: 0341-5775 , , , :
Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile
Rapid.Tech 2011 (Erfurt)
In: Rapid.Tech 2011 2011 , :
Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile
In: RTejournal - Forum für Rapid Technologie 8 (2011), p. 1
ISSN: 1614-0923 , :
Dauergebrauchseigenschaften von Mikrobauteilen - Einfluss von Herstell- und Einsatzbedingungen
Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe)
In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 , :
Einfluss von Herstell- und Umgebungsbedingungen auf die Eigenschaften spritzgegossener Mikrobauteile aus Polyamid 66
22. Technomer 2011 (Chemnitz)
In: 22. Technomer 2011 2011 , :
Vibrationsschweißen von strahlenvernetztem Polyamid 66 - Untersuchungen zur Erweiterung des Anwendungsspektrums
In: Joining Plastics - Fügen von Kunststoffen 5 (2011), p. 46-57
ISSN: 1864-3450 , , :
Das Automobil von morgen - Kunststoff-Lösungen und technische Trends
35. Internationaler Kongress: Kunststoffe im Automobilbau (Mannheim)
In: Kunststoffe im Automobilbau 2011 , :
Hohlkörperverbundstrukturen im Minutentakt
In: Kunststoffe 101 (2011), p. 110-114
ISSN: 0023-5563 , , , :
Hollow Composite Structures One-a-minute
In: Kunststoffe International 101 (2011), p. 69-73
ISSN: 1862-4243 , , , :
Verfahrenstechnische Herausforderungen bei der Einarbeitung von elektrisch leitfähigen Masterbatches mit Multi-walled Carbon Nanotubes im Spritzgießprozess
22. Technomer 2011 (Chemnitz)
In: 22. Technomer 2011 2011 , :
Thermoformability of Radiation cross linked Polyamide 12
ANTEC (Boston, Massachusetts, USA, 1st May 2011 - 5th May 2011)
In: SPE Proceedings ANTEC 2011 2011 , :
Analyse von Skalierungseffekten beim Expansionsspritzgießen von Mikro- und Dünnwandbauteilen
Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe)
In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 , :
Expansion-injection-molding (EIM) by cavity near melt compression - About the process characteristic
In: CIRP Journal of Manufacturing Science and Technology 4 (2011), p. 376-381
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2011.06.009 , :
Influence of Expansion Injection Moulding (EIM) upon Part Properties
44th Conference on Manufacturing Systems (Madison, WI)
In: 44th Conference on Manufacturing Systems 2011 , :
Piezoaktive Faserverbundbauteile - Health Monitoring an verbundspritzgegossenen Sandwichstrukturen
17. Nationales Symposiu, Sampe (Aachen)
In: 17. Nationales Symposium 2011 , :
Funktionsorientierte Herstellung eines Encoders auf Basis kunststoffgebundener Dauermagnete im Montagespritzgießverfahren
AmE 2011 - Automotive meets Electronics (Dortmund)
In: AmE 2011 - Automotive meets Electronics 2011 , :
Improvement of the Stability of Polymer Bonded Rare-Earth-Magnets during the Injection Molding Process
ANTEC (Boston, Massachusetts, USA, 1st May 2011 - 5th May 2011)
In: SPE Proceedings ANTEC 2011 2011 , :
Improving the stability of magnetic fillers in plastics during processing
In: GAK Gummi Fasern Kunststoffe 64 (2011), p. 219-223
ISSN: 0176-1625
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955133875&origin=inward , , :
Verbesserung der Stabilität magnetischer Füllstoffe in Kunststoffen während der Verarbeitung
In: GAK Gummi Fasern Kunststoffe 64 (2011), p. 219-223
ISSN: 0176-1625 , , :
Innovative konstruktive und fertigungstechnische Möglichkeiten zur Kühlung von LEDs mit wärmeleitfähigen Kunststoffen
Symposium Connectors (Lemgo)
In: 3rd Symposium Connectors 2011 , , :
Adhesive bonding between multi-material assembly injection molding parts with an adhesive interlayer
In: Journal of Polymer Engineering 31 (2011), p. 539-548
ISSN: 0334-6447
DOI: 10.1515/POLYENG.2011.096 , , , :
Fertigungsgerechte Gestaltung hochbelasteter Faserverbundbauteile für die Großserie
22. Technomer 2011 (Chemnitz)
In: 22. Technomer 2011 2011 , , :
Hochbelastbare Faserverbundbauteile großserientauglich hergestellt
In: Lightweight Design 4 (2011), p. 38-43
ISSN: 1865-4819 , , , :
Assembly and Interconnection Technologies for MID based on Thermally Conductive Plastics for Heat Dissipation
34th International Spring Seminar on Electronics Technology (High Tatras Slovakia, 11th May 2011 - 15th May 2011)
In: 34th International Spring Seminar on Electronics Technology 2011
DOI: 10.1109/ISSE.2011.6053559 , , , , , :
Wärmeverteilung in elektronischen Baugruppen optimieren
In: Elektronikpraxis - Profiline (2011), p. 74-76
ISSN: 0341-5589 , , , , :
Optimierungsstrategien für Mikrobauteile
In: Kunststoffe 101 (2011), p. 62-65
ISSN: 0023-5563 , :
Optimization Strategies for Micro Parts
In: Kunststoffe International 101 (2011), p. 50-53
ISSN: 1862-4243 , :
Dickwandige Kunststoffoptiken - Druckverfestigung als neues Verfahren für präzise Bauteile
2. VDI-Fachkonferenz: Kunststoffe in Optischen Systemen (Baden-Baden)
In: Kunststoffe in Optischen Systemen 2011 , , :
Klebstoffvernetzung durch Vibrationstechnik
In: Adhaesion Kleben und Dichten 55 (2011), p. 42-46
ISSN: 1619-1919 , :
Vibrationsschweißen von strahlenvernetzten, technischen Thermoplasten
PTS Technologie Seminar (Veserde-Wiblingwerde/Adelshofen)
In: PTS Technologie Seminar 2011 , :
Montagespritzgegossene Überlastkupplungen - EJOtorque
VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth)
In: Kunststoffe in der Mechatronik 2011 , :
Der richtige Dreh (Teil 3) - Auslegungsstrategie montagespritzgegossener Rutschkupplungen
In: Zeitschrift Kunststofftechnik 7 (2011), p. 225-253
ISSN: 1864-2217 , , , , :
The right turn (part 3) - design strategy for assembly injection moulded friction-clutches
In: Zeitschrift Kunststofftechnik 7 (2011), p. 225-253
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80755137035&origin=inward , , , , :
Die Forschergruppe 702: Maschinen-, Werkzeug- und Prozessentwicklung für neue Verfahren zur Herstellung von Mikrobauteilen über flüssige Phasen
Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe, 11th October 2011 - 12th October 2011)
In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 , , , , , , , , , :
Highly Filled Polymers for Mechatronic Devices
Smart Plastics Congress (Linz (A))
In: Smart Plastics Congress 2011 , :
Neue Prozessstrategien für Hybridstrukturen auf Basis faserverstärkter Thermoplaste
Fachtagung Thermoplastische Faserverbundkunststoffe (Fürth)
In: Thermoplastische Faserverbundkunststoffe 2011 , :
Spritzgießen mechanisch tragender Werkstoffverbunde
VDI-Jahrestagung Spritzgießen 2011 (Baden-Baden)
In: Spritzgießen 2011 2011 , :
Effects of Masterbatch Dilution in Injection Moulding Machines on the Morphology and Electrical Properties of PA6/MWCNT
Eurofillers 2011 (Dresden)
In: Eurofillers 2011 2011 , :
Einarbeitung nanoskaliger Füllstoffe in thermoplastische Matrices mittels Masterbatches
2. VDI-Fachkonferenz Kunststoffe in Optischen Systemen" (Baden-Baden)
In: Kunststoffe in Optischen Systemen 2011 , :
Optoelektronische Systeme auf Basis wärmeleitfähig modifizierter MIDs
Workshop Innovative Anwendungen der MID-Technik (Stuttgart)
In: Workshop Innovative Anwendungen der MID-Technik 2011 , :
Berücksichtigung temperaturabhängiger Stoffkennwerte bei der Auslegung optischer Systeme aus Kunststoff
2. VDI-Fachkonferenz "Kunststoffe in Optischen Systemen" (Baden-Baden)
In: Kunststoffe in Optischen Systemen 2011 , , :
Polymer powders for Selective Laser Sintering - Production and Characterization
44th Conference on Manufacturing Systems (Madison, WI)
In: 44th Conference on Manufacturing Systems 2011 , , , :
Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten
In: RTejournal - Forum für Rapid Technologie 8 (2011), p. 1
ISSN: 1614-0923 , , :
Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology
Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference (Austin, 8th August 2011 - 10th August 2011)
In: Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2011 , , , :
Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten
Rapid.Tech 2011 (Erfurt)
In: Tagungsband Rapid.Tech 2011 2011 , :
High Dimensional Stability by Compression Induced Solidification
The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference (Quindao)
In: The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference 2011 , :
Improved vacuum thermoforming of polyamide
In: SPE Plastics Research Online (2011), p. 1-3
DOI: 10.1002/spepro.003969
URL: http://www.4spepro.org/view.php?source=003969-2011-12-7 , :
The effect of high energy electron beam radiation on the thermoformability of Polyamide 12 films
11th Annual International Polymer Colloquium (Madison, WI)
In: 11th Annual International Polymer Colloquium 2011 , :
Vernetzte, funktionalisierte Thermoplastfolien für mechatronische Anwendungen
VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth)
In: Kunststoffe in der Mechatronik 2011 , , , :
Auslegung langfaserverstärkter Thermoplastformteile
In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 62 (2011), p. 160-163
ISSN: 0032-1338 , , , , :
Ultrasonic and Impulse Welding of Polylactic Acid Films
In: Polymer Engineering and Science 51 (2011), p. 1059-1057
ISSN: 0032-3888
DOI: 10.1002/pen.21919 , , , , :
Substitution of powders by ultrashort cut fibers for selective lasersintering (SLS)
11th world textile conference AUTEX (Mulhouse (F))
In: 11th world textile conference AUTEX 2011 , , , , :
2010
Untersuchung der Materialalterung bei pulverbasierten Schichtbauverfahren
In: RTejournal - Forum für Rapid Technologie 7 (2010), p. 1-5
ISSN: 1614-0923 , , , :
Thermoplastische Hochleistungsfaserverbunde stehen vor einer großen Renaissance
In: Intelligenter Produzieren (2010), p. 6-8
ISSN: 1869-2745 , :
Montagespritzgießen verbindet Metall und Thermoplast
In: Maschinenmarkt 116 (2010), p. 34-36
ISSN: 0341-5775 , , :
Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering
In: Physics Procedia 5 (2010), p. 533-542
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2010.08.081 , , :
MK2 - A novel assembly injection molding process for the combination of functional metal surfaces with polymer structures
In: Journal of Materials Processing Technology 210 (2010), p. 1852-1857
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2010.06.020 , , , :
Investigation of Thermoformability of E-Beam Cross Linked Polyamide 12
In: Zeitschrift Kunststofftechnik (2010), p. 292-315
ISSN: 1864-2217 , :
Irradiation Opens up Third Film Dimension
In: Kunststoffe International 100 (2010), p. 49
ISSN: 1862-4243 , , :
Strahlen öffnen dritte Foliendimension
In: Kunststoffe 100 (2010), p. 55-59
ISSN: 0023-5563 , , :
Montagespritzguss piezoaktiver Sandwichverbunde
In: Zeitschrift Kunststofftechnik 6 (2010), p. 165-190
ISSN: 1864-2217 , , :
The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact.
In: Wear 268 (2010), p. 905-910
ISSN: 0043-1648
DOI: 10.1016/j.wear.2009.12.025 , , , , , :
Determination and use of wear qualities based on model and component tests for the design of thermoplastic gears
In: Tribologie und Schmierungstechnik 57 (2010), p. 9-20
ISSN: 0724-3472
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956924902&origin=inward , , , :
Ermittlung und Anwendung von Verschleißkennwerten basierend auf Modell und Bauteilversuchen für die Auslegung von Getrieben aus Thermoplastkunststoffen
In: Tribologie und Schmierungstechnik 57 (2010), p. 9-20
ISSN: 0724-3472 , , , :
Integration radarbasierter Fahrerassistenzsysteme in Kunststoffkarosserieteile
Automotive meets Electronics (Dortmund, 15th April 2010 - 16th April 2010)
In: Automotive meets Electronics, Berlin: 2010 , , , :
Potential of thermally conductive polymers for the cooling of mechatronic parts
In: Physics Procedia 5 (2010), p. 735-744
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2010.08.106 , :
Wärmemanagement von LED mit wärmeleitfähigen Kunststoffen
1. VDI-Konferenz "Kunststoffe in optischen Systemen" (Erlangen)
In: 1. VDI-Konferenz "Kunststoffe in optischen Systemen" 2010 , :
Assembly Molding of Tight Mechatronic System - A Model Approach
In: Journal of Manufacturing Science and Engineering 132 (2010), p. 054505-1-054505-4
ISSN: 1087-1357
DOI: 10.1115/1.4002547 , , , :
Thermisch leitfähige Kunststoffe für eine kostengünstige Fertigung und erweiterte Funktionalität in der MID‐Technologie
In: PLUS - Produktion von Leiterplatten und Systemen (2010), p. 1-10 , , , , :
New Aspects of Process-Induced Properties of Micro Injection Molded Parts
In: Plastics Rubber and Composites 39 (2010), p. 308-314
ISSN: 1465-8011 , , :
New aspects of process induced properties of microinjection moulded parts
In: Plastics Rubber and Composites 39 (2010), p. 308-314
ISSN: 1465-8011
DOI: 10.1179/174328910X12691245470392 , , :
Tribologische Eigenschaften modifizierter Kunststoffe
Tribologie- und Schmierstoffkongress GETLUB (Würzburg)
In: Tribologie- und Schmierstoffkongress GETLUB 2010 , , :
Feasibility study of additive manufacturing of thermally conductive pa12 powders by selective mask sintering
68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956676154&origin=inward , , :
Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern
Tribologie- und Schmierstoffkongress GETLUB (Würzburg)
In: Tribologie- und Schmierstoffkongress GETLUB 2010 , , :
Characterization of new thermoplastics for additive manufacturing by selective laser sintering
68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956666230&origin=inward , , :
Untersuchung der Thermoformbarkeit von elektronenstrahlvernetztem Polyamid 12
In: Zeitschrift Kunststofftechnik 6 (2010), p. 292-315
ISSN: 1864-2217 , :
Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile
In: RTejournal - Forum für Rapid Technologie 7 (2010), p. -
ISSN: 1614-0923 , , , , , , :
2009
Tight material bonds within mechatronic systems by assembly moulding
In: Zeitschrift Kunststofftechnik (2009), p. 427-450
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77949286283∨igin=inward :
Innovative Automobilradaranwendungen durch Folientechnologie
Technomer: 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz, 12th November 2009 - 14th November 2009)
In: Technomer 2009 , :
Funktionalisierte Bauteile durch Selektives Maskensintern
In: RTejournal - Forum für Rapid Technologie 6 (2009), p. 1-5
ISSN: 1614-0923 , , :
Selektives Lasersintern von teilkristallinen Thermoplasten
In: RTejournal - Forum für Rapid Technologie 6 (2009), p. 1-5
ISSN: 1614-0923 , , :
Polymer bonded soft magnetics for EMI filter applications
3rd Int. Conference on Automotive Power Electronics (APE) (Paris, 25th March 2009 - 26th March 2009) , , , , , :
Untersuchungen zur Eignung heißgeprägter Folien für die Integration von Antennen in Automotive-Exterieurbauteile
In: Zeitschrift Kunststofftechnik 5 (2009), p. 385-410
ISSN: 1864-2217 , , , :
Verbesserung der Stabilität kunststoffgebundener Selten-Erd Dauermagnete während der Verarbeitung und im Gebrauch
21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
In: Technomer 2009 , , :
Thermally conductive modified polymers- Part 1: Experimental analysis and modelling description of a process dependent part property
In: Zeitschrift Kunststofftechnik (2009), p. 338-358
ISSN: 1864-2217
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=70349538917&origin=inward , , :
Wärmeleitfähig modifizierte Kunststoffe - Teil 1: experimentelle Analyse und Modellbeschreibung einer bauteil- und prozessabhängigen Materialeigenschaft
In: Zeitschrift Kunststofftechnik 5 (2009), p. 338-358
ISSN: 1864-2217 , , :
2K-Hochleistungszahnräder - Läuft wie geschmiert
In: Kunststoffe 99 (2009), p. 38-42
ISSN: 0023-5563 , , , , :
Einfluss der Prozesscharakteristik des Expansionsspritzgießens auf die Eigenschaften von Mikrobauteilen aus PP
21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
In: Technomer 2009 , , , :
2008
- Al-Sheyyab A., Massimo Cojutti, Kägeler C., Detlev Staud, et al.:
Flächige Leichtbauteile: Anwendungsmöglichkeiten im Automobilbau
In: Konstruktion 60 (2008), p. 78-82
ISSN: 0720-5953
Der richtige Dreh (Teil 1) - Kennwertermittlung für das Montagespritzgießen
In: Zeitschrift Kunststofftechnik 4 (2008), p. 1-21
ISSN: 1864-2217 , , , , :
Verarbeitungseinflüsse beim Spritzgießen multipolarer, kunststoffgebundener Dauermagnete
In: Zeitschrift Kunststofftechnik 4 (2008), p. 1-33
ISSN: 1864-2217 , , , :
Effects during injection molding of polymer- bonded magnets with multipolar structure
In: Zeitschrift Kunststofftechnik (2008)
ISSN: 1864-2217 , , , :
Investigation of Material Compatibility for Embedding Stereolithography
In: Proceedings of the Conference Multi-Material Micro Manufacture 4M 2008 , , , , , :
2007
Qualitätsmanagement komplexer Verbundforschungsprojekte
In: QZ Qualität und Zuverlässigkeit (2007), p. 46-47
ISSN: 0720-1214 , , , , , :
Karosserieaussenhaut mit integrierter Antenne
In: Kunststoffe (2007), p. 56-63
ISSN: 0023-5563 , , , , :
Outer Body Skin with an Integrated Antenna
In: Kunststoffe International (2007), p. 26-30
ISSN: 1862-4243 , , , , :
Produktionsmanagement als effizientes Werkzeug zur Vernetzung von Forschungsprojekten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2007), p. 765-770
ISSN: 0932-0482
DOI: 10.3139/104.101215 , , , , , , , , :
2005
Spritzgießwerkzeuge mit integriertem Magnetrichtfeld zur Herstellung kunststoffgebundener Dauermagnete
In: PLUS - Produktion von Leiterplatten und Systemen 7 (2005), p. 1251-1254 , , , :
2004
Combined bonded rotor for DC motors with different magnetic materials and field areas
In: IEEE Transactions on Magnetics 40 (2004), p. 2077-2079
ISSN: 0018-9464
DOI: 10.1109/TMAG.2004.832280 :
Verarbeitung und Eigenschaften kunststoffgebundener Dauermagnete (Dissertation, 2004) :
2003
Werkstoff- und prozessoptimierte Herstellung flächiger Kunststoff-Kunststoff und Kunststoff-Metall-Verbundbauteile
DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003 (Erlangen, 15th October 2003 - 16th October 2003)
In: Geiger Manfred, Ehrenstein Gottfried W. (ed.): DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003, Bamberg: 2003
URL: http://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2003/Ehrenstein03-WUP.pdf , , , , :
Intelligent machine technology for flat, lightweight components
In: Kunststoffe 93 (2003), p. 48-50
ISSN: 0023-5563
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0038275781&origin=inward , , :
2001
Lasergestützte additive Leiterbilderzeugung
In: Geiger, M.; Fleckenstein, M. (ed.): Laser in der Elektronikproduktion & Feinwerktechnik - Tagungsband des 4. Erlanger Seminars LEF 2001 2001 , :
Produktionsentstehung eines ölstandssensors in MID-Technik: Vorteile der Laserstrukturierung
In: Feldmann, K. (ed.): Fachseminar - Innovative Produktgestaltung mit MID, 18.01. und 05.04. 2001 , :
Laserstrahljustieren als Innovation für die Montage von Mikrosystemen
In: Idee-Vision-Innovation, 2001, p. 275-286 , , :
Laser supported activation and additive metallization of thermoplastics for 3D-MIDs
In: Geiger, M.; Otto, A. (ed.): Laser Assisted Net Shape Engineering 3 - Proceedings of the LANE 2001, Erlangen 28.-31.08 2001 , , , :
Design, fabrication, and application of precise SAW delay lines used in an FMCW radar system
In: IEEE Transactions on Microwave Theory and Techniques 49 (2001), p. 787-794
ISSN: 0018-9480
DOI: 10.1109/22.915465 , , , , , , :
1998
Structural and electronic properties of self-assembled supramolecular grid structures: Doping of supramolecular thin films
In: Materials Research Society Symposium - Proceedings 488 (1998), p. 447-452
ISSN: 0272-9172
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-17144462000&origin=inward , , , , , , , , , , , , , :
1996
Design, Fabrication, and application of precise delay lines at 2.45 GHz
Proceedings of the 1996 IEEE Ultrasonics Symposium. Part 2 (of 2) (San Antonio, USA, 3rd November 1996 - 6th November 1996)
In: IEEE International Ultrasonics Symposium 1996
DOI: 10.1109/ULTSYM.1996.583970 , , , , , :
Contact Person
Ayse Aksungur
Institute of Polymer Technology
Additive Manufacturing
- Phone number: +49 9131 85-71060
- Email: ayse.aksungur@fau.de